You are not logged in.

#1 2019-07-18 06:42:21

rossboulet
Member
Registered: 2017-12-13
Posts: 49

[SOLVED] Network does not start at boot with 5.2.1 kernel

I've been waiting for the release of an "official" 5.2.x kernel for a week to see if I did something wrong. I normally compile my own kernel when a new release comes out, but when 5.2 came out, one of my systems would not connect to the network. After some tinkering I found that I needed to issue a "ip link set enp0s18 up" to get my network up. I resorted to an @reboot cron task so I wouldn't lose contact after a restart.

Here is some (hopefully relevant) info:

# lspci
00:00.0 Host bridge: VIA Technologies, Inc. P4M266 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0a.0 Communication controller: LSI Corporation LT WinModem (rev 02)
00:10.0 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.1 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.2 USB controller: VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 80)
00:10.3 USB controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102/VT6103 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: S3 Graphics Ltd. VT8375 [ProSavage8 KM266/KL266]
# lsmod
Module                  Size  Used by
snd_wavefront          40960  0
ppdev                  24576  0
snd_cs4236             36864  0
snd_wss_lib            32768  2 snd_cs4236,snd_wavefront
snd_opl3_lib           20480  2 snd_cs4236,snd_wavefront
mousedev               20480  1
snd_via82xx            32768  0
snd_ac97_codec        114688  1 snd_via82xx
snd_hwdep              16384  2 snd_opl3_lib,snd_wavefront
savagefb               36864  0
ac97_bus               16384  1 snd_ac97_codec
pcspkr                 16384  0
snd_pcm               102400  4 snd_via82xx,snd_cs4236,snd_ac97_codec,snd_wss_lib
input_leds             16384  0
via_rhine              32768  0
vgastate               20480  1 savagefb
i2c_algo_bit           16384  1 savagefb
via_agp                16384  1
i2c_viapro             20480  0
fb_ddc                 16384  1 savagefb
snd_timer              32768  3 snd_opl3_lib,snd_wss_lib,snd_pcm
agpgart                36864  1 via_agp
mii                    16384  1 via_rhine
snd_mpu401             16384  0
snd_mpu401_uart        16384  4 snd_mpu401,snd_via82xx,snd_cs4236,snd_wavefront
ns558                  16384  0
snd_rawmidi            32768  2 snd_mpu401_uart,snd_wavefront
evdev                  20480  4
snd_seq_device         16384  2 snd_opl3_lib,snd_rawmidi
parport_pc             36864  0
gameport               16384  3 ns558,snd_via82xx
snd                    73728  13 snd_mpu401,snd_hwdep,snd_via82xx,snd_cs4236,snd_opl3_lib,snd_ac97_codec,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_wss_lib,snd_seq_device,snd_wavefront,snd_pcm
parport                49152  2 parport_pc,ppdev
soundcore              16384  1 snd
mac_hid                16384  0
sg                     32768  0
crypto_user            16384  0
ip_tables              24576  0
x_tables               32768  1 ip_tables
ext4                  602112  1
crc32c_generic         16384  1
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  106496  1 ext4
hid_generic            16384  0
usbhid                 53248  0
hid                   110592  2 hid_generic,usbhid
sr_mod                 24576  0
cdrom                  61440  1 sr_mod
sd_mod                 45056  3
ata_generic            16384  0
pata_acpi              16384  0
pata_via               16384  2
libata                221184  3 pata_via,ata_generic,pata_acpi
uhci_hcd               45056  0
scsi_mod              196608  4 sd_mod,libata,sr_mod,sg
ehci_pci               20480  0
ehci_hcd               73728  1 ehci_pci
floppy                 61440  0
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s18: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:4c:ce:85:f6 brd ff:ff:ff:ff:ff:ff
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s18: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:e0:4c:ce:85:f6 brd ff:ff:ff:ff:ff:ff

As you can see, the Ethernet state is DOWN.

After I issue the "ip link set enp0s18 up", everything seems to be back.

# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp0s18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 1000
    link/ether 00:e0:4c:ce:85:f6 brd ff:ff:ff:ff:ff:ff
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp0s18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
    link/ether 00:e0:4c:ce:85:f6 brd ff:ff:ff:ff:ff:ff
    inet 192.168.69.11/24 brd 192.168.69.255 scope global enp0s18
       valid_lft forever preferred_lft forever
    inet6 2600:1700:1260:5b80::11/64 scope global tentative
       valid_lft forever preferred_lft forever
    inet6 fe80::2e0:4cff:fece:85f6/64 scope link tentative
       valid_lft forever preferred_lft forever

Any suggestions? I don't see anything unusual in the logs or in dmesg.

Last edited by rossboulet (2019-08-04 19:05:06)

Offline

#2 2019-07-18 12:24:47

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Can reproduce this. Quite annoying. I don't know if this is a kernel, a systemd-networkd or whatever bug..

systemctl status systemd-networkd says:

ens3: Could not bring up interface: Invalid argument

Offline

#3 2019-07-18 12:36:41

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

I feel this is a regression in systemd-networkd as it was causing issues every now and then:

https://bugs.launchpad.net/ubuntu/+sour … ug/1623068

Offline

#4 2019-07-18 12:40:11

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

I can confirm that downgrading the kernel to 5.1.16 "fixes" the issue.

(abaumann wonders what kernels are supported and tested with systemd)

Offline

#5 2019-07-18 19:12:07

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

andreas_baumann wrote:

Can reproduce this. Quite annoying. I don't know if this is a kernel, a systemd-networkd or whatever bug..

systemctl status systemd-networkd says:

ens3: Could not bring up interface: Invalid argument

I see the "Invalid argument" in 5.1.16 too, but the interface still comes up.

Offline

#6 2019-07-18 19:18:56

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

At first I was thinking it had something to do with the specific NIC in my machine, but the comments about systemd took my research in a new direction. If I enable dhcpcd, the network comes up without my cron job having to do it. My machine has a static address, so I had no need for dhcpcd before. I do see that a newer version of systemd (242.32-3) is in staging. The current production version is 242.29-1. Perhaps there is a fix for this behavior in the newer systemd.

Offline

#7 2019-07-18 19:23:33

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Hmm, my systemctl status systemd-networkd says:

● systemd-networkd.service - Network Service
   Loaded: loaded (/usr/lib/systemd/system/systemd-networkd.service; disabled; v>
   Active: inactive (dead)

Dunno why it says disabled.  I only updated today fwiw, so I'm actually still running the old 5.1.x kernel at present.  I also see nothing in journalctl under any sensible unit names I can guess at, and netctl status looks good although it does say my logs have been rotated today, so that might explain some of this oddness.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#8 2019-07-19 08:44:30

bulletmark
Member
Registered: 2018-05-30
Posts: 21

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

This is a bad bug. Now I know why my remote Arch 32 box did not come back up after the update I did a couple of days ago. Can somebody please post here when the bug is fixed as I won't bother driving over to it until then.

Offline

#9 2019-07-19 16:18:43

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

bulletmark wrote:

This is a bad bug. Now I know why my remote Arch 32 box did not come back up after the update I did a couple of days ago. Can somebody please post here when the bug is fixed as I won't bother driving over to it until then.

Not a fix, but I do have two workarounds:

1) create a cron entry for root (assuming you're running cron) that has "@reboot ip link set enpxxxxx up" where enpxxxx is the name of your interface

or

2) Even though you probably have a static IP address, enable dhcpcd:
# systemctl enable dhcpcd
# systemctl start dhcpcd

Either of these will bring the interface up at boot time.

Offline

#10 2019-07-19 17:43:33

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

FWIW, my EeePC901 seems to have come back with full networking today on the 5.2.1 kernel just fine.  But I'm having a hard time debugging anything going on here, so I'm at a loss to say what's different here, other than me using the testing repos on top of the standard ones.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#11 2019-07-23 02:33:34

bulletmark
Member
Registered: 2018-05-30
Posts: 21

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Has this issue been fixed yet?

Offline

#12 2019-07-27 23:17:17

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Not a fix, but I switched my system from using systemd-networkd to netctl and it seems to work fine with netctl

Offline

#13 2019-07-28 06:05:09

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Ah, that might explain why I've not hit this problem yet.  I just stuck with netctl from the default install.  Since 5.2.1 I have seen the machine drop off the network a little more frequently (perhaps at DHCP renegotiation, I'll have to check), but at boot it's always there for me.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#14 2019-08-04 09:38:52

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

The problem is not in the kernel 5.2, systemd-network has a problem opening connections on networks which come down per default from the kernel.
For kernel 5.2.x you need systemd 242.84.

systemd got stuck in a unresolved dependency on libip4tc.so.0/libip4tc.so.2, so I had to force rebuild iptables.

I pushed i686 and pentium4 packages accordingly.

The i486 got stuck in 5.1.x, dunno why. Most likely the few build slaves are still building unnecesary things, so the linux
kernel and systemd fell behind.

Offline

#15 2019-08-04 16:29:40

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 1,197

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

FWIW, I think it's a good idea for everyone to set their signature to signify what architecture they're using to identify differences in configuration like this more quickly in these discussions.  It's why I set my signature as I have at least.  Signatures are on the 'personality' tab of your profile, and the option to hide them if people start abusing them is on 'display', but thus far they're mostly unused here I've noticed.  There's no need for more than 1 line of signature really.  Anyone else agree?


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#16 2019-08-04 16:49:36

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

As to the signature, I have multiple systems, so having the specifics in the signature isn't practical.  And I usually try to reproduce the problem on other machines including a virtual machine before I post about it.

Offline

#17 2019-08-04 17:06:00

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

So, also my signature would be:

i486/i686/pentium4 on 15 systems.

:-)

Offline

#18 2019-08-04 19:04:34

rossboulet
Member
Registered: 2017-12-13
Posts: 49

Re: [SOLVED] Network does not start at boot with 5.2.1 kernel

Just tested and agree the new version of systemd and systemd-networkd (242.84) fixed the issue. However, I thing I may stick with netctl on my future installs. Marked as solved.

Last edited by rossboulet (2019-08-04 19:05:46)

Offline

Board footer

Powered by FluxBB