You are not logged in.

#1 Re: System Administration » How do you play HD videos on your low end hardware? » 2019-05-26 03:13:56

I see. For esample when I run:

ffmpeg -i video720p.mp4 -c:v rawvideo -f null - > /dev/null

Then I get an FPS value of 40-42, which means that my current hardware is able to decode a 29.97 fps video in real time.  Problem arises when I want to display the video:

ffmpeg -i video720p.mp4 -c:v rawvideo -f matroska - | mplayer -

Then the video plays choppy, or slow-motion, audio and video get desynchronized.

I think my video output driver is too slow with the nouveau driver and my current video card which has the nv17 chip.

When I try a different video output, eg "xv"

ffmpeg -i video720p.mp4 -c:v rawvideo -f matroska - | mplayer - -vo xv

Then the video seems to play faster, but I experience the so called tearing effect.

#2 System Administration » How do you play HD videos on your low end hardware? » 2019-05-25 22:46:42

anselm
Replies: 3

Youtube is not problem, because one can switch to a lower resolution. However video torrents usually contain HD (720p or 1080p) videos.  Are you able to play them on your low end CPU? Which player / settings to use to play at least 720p h264 content?

#3 Kernel & Hardware » About how many performance increase if upgrading to an Atom processor? » 2019-05-06 19:00:37

anselm
Replies: 2

I am planning to upgrading my current system which is an Pentium 4 2.4 Ghz with 2GB RAM and can only be started by slightly warming it up with a hair-dryer due to the aging capacitors on the mainboard, to an Atom x5-Z8350 processor with 4GB RAM ( https://en.wikichip.org/wiki/intel/atom_x5/x5-z8350 ). How many performance increase should I expect? For example when I am encoding an HD 720p video with ffmpeg into H264, now I get only 4-5 fps. About how many increase in fps with this task and overall (browsing, youtube, different apps) when using this relatively cheap Atom processor? Maybe somebody used or are using such a system.

#4 Re: Kernel & Hardware » System is not able to resume after hibernate » 2019-05-05 18:23:38

I also can't hibernate my system, and it is quite annoying, because I have to open all applications again, opening the last edited files again and again, etc. I think I have a particular motherboard which has issues with hibernation (Intel D865PERL).

#5 Re: Installation » Qt problem: Cannot mix incompatible Qt library » 2019-05-05 14:59:36

Yes, when I posted this question I used the i686 package. After that I realized that there is a new architecture, pentium4, which provides some performance benefit. I installed it immediately, launching the appropriate pacman commands, after I edited the arch line in pacman.conf, and this particular problem has been resolved. However I got new problems after that: I had to compile the icu63 package, because I wasn't able to run smplayer and chromium elsewhere. I also had to copy two files into /usr/lib manually from the tar.xz package cache, namely "libcdio.so.18", so it coexists now with "libcdio.so.19". If I install the correspondent packages, only one of them survives, and it's strange, but mplayer refuse to start, if any of them is missing.

System truly became slightly faster, after I managed to disable baloo file extractor again, but I am still unable to play HD 720p video content. In the past I was able to play HD videos on this same machine, the only changes is video card was downgraded from Geforce FX 5200 to Geforce MX 440 and driver is nouveau instead of nvidia-96xx-dkms. Maybe the video output driver is slower, or something.

#6 Installation » Qt problem: Cannot mix incompatible Qt library » 2019-05-04 17:32:01

anselm
Replies: 4

After today update, I get always an error when trying to launch VLC:

Cannot mix incompatible Qt library (version 0x50c01) with this library (version 0x50c03)

I tried to downgrade VLC, but no success.

#7 Re: System Administration » Ruby 2.6 Rubygems error » 2019-02-15 04:04:37

Now it works, thanks. I had to install the "rubygems" package too, with

yay -Syy rubygems

#8 Re: Kernel & Hardware » How to install linux-ck without compiling? » 2019-02-15 04:00:45

I thought maybe somebody compiled it for himself, and can provide the  .pkg.tar.xz file.
About how many time would it take to compile that package? Few hours or a whole day?

#9 Kernel & Hardware » How to install linux-ck without compiling? » 2019-02-13 02:12:10

anselm
Replies: 4

For a (maybe) better desktop performance. Are there any pre-compiled packages anywhere? I would be interested particularly in the "linux-ck-p4" package or else in the general "linux-ck" package. Repository "repo-ck" ( http://repo-ck.com ) has only support for architecture x86_64... Should I install from the AUR by compiling the whole? Could take long time on old 32 bit machines.

#10 System Administration » Ruby 2.6 Rubygems error » 2019-02-01 20:52:33

anselm
Replies: 4

After that I upgraded Ruby to version 2.6, I am unable to use it anymore. I always get this error message, even when I issue a simple "ruby --version" command:

Traceback (most recent call last):
	1: from <internal:gem_prelude>:2:in `<internal:gem_prelude>'
<internal:gem_prelude>:2:in `require': cannot load such file -- rubygems.rb (LoadError)

And I have to downgdare Ruby to the previous 2.5.x version, to make it work by:

sudo pacman -U https://archive.archlinux32.org/packages/r/ruby/ruby-2.5.3-1.0-i686.pkg.tar.xz

Then it works again.

#11 Re: Installation » Advice for partitioning a new 1 TB hard disk » 2019-01-31 03:00:45

Installation with "pacstrap" and "arch-chroot" was successful! Unfortunately hibernation doesn't work, need to be resolved yet. New system with 4.20 kernel and Nouveau video driver is more responsive than my previous installation with 4.10 kernel and nvidia-96xx-dkms video driver. However the hard disk became a faster one, programs load in reasonably shorter time now. GUI system was xfce4 in both cases.

#13 Re: System Administration » [SOLVED] After last update VLC won't start anymore: skins2 interface.. » 2019-01-24 15:33:00

I had to run:

sudo strip --remove-section=.note.ABI-tag /usr/lib/libQt5Core.so.5

According to this https://superuser.com/questions/1347723 … -installed and now every Qt5 applications works fine!

#14 System Administration » [SOLVED] After last update VLC won't start anymore: skins2 interface.. » 2019-01-23 01:40:48

anselm
Replies: 6

I always get the error message when I try to start VLC player:

"skins2 interface error: cannot instantiate dialogs provider"

VLC media player 3.0.4 Vetinari (revision 3.0.4-0-gf615db6332)
[80727ba0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[808a9270] skins2 interface error: cannot instantiate dialogs provider
[807b9480] main playlist: playlist is empty
[808a9270] [cli] lua interface: Listening on host "*console".
VLC media player 3.0.4 Vetinari
Command Line Interface initialized. Type `help' for help.
[808a9270] [cli] lua interface error: Error loading script /usr/lib/vlc/lua/intf/cli.luac: lua/intf/modules/host.lua:289: Interrupted.
>

I tried to run: vlc --reset-config --reset-plugins-cache
But no success.

#15 Re: Installation » Survey: On what cpu do you (want to) use archlinux32? » 2019-01-22 18:01:11

model name    : Intel(R) Pentium(R) 4 CPU 2.40GHz
model name    : Intel(R) Pentium(R) 4 CPU 2.40GHz

Hyperthread, Intel D865PERL Mobo

#16 Installation » Advice for partitioning a new 1 TB hard disk » 2019-01-22 17:28:25

anselm
Replies: 9

I have bought a new 1 TB Toshiba (DT01ACA100) SATA hard drive. I need some advice how to partition it properly. My current partition scheme I applied to the disk:

mMfIxRm.png

- 1 GB ext4 partition for boot manager, if needed.
- 125 GB ext4 partition for Arch Linux 32 bit system, with installed programs, etc.
- 8 GB partition for Linux swap.
- 797 GB extended partition
- - 672 GB ext4 partition for general / media storage.
- - 62 GB ntfs partition for possible installing a Windows system in the future with dual boot, in case of need / emergency / etc, or experimenting with other Linux distros.
- - another 62 GB partition for trying out different file systems (btrfs, etc).

Currently I have attached my both hard drive to the computer by SATA cable, and I am running my Arch Linux 32 bit system from the other 500 GB Western Digital drive. My another question: is it possible to make a "clean" installation of Arch Linux 32 bit onto the 1 TB new drive while I am running the Linux system from the other 500 GB drive?

#17 Installation » 32 bit binary repo for Otter Browser? » 2018-12-17 21:11:33

anselm
Replies: 6

I would like to try out otter-browser, but only a 64 bit Appimage is available, otherwise I should compile it from the sources, which is a painfully slow process on any 32 bit system. Maybe somebody have compiled it already, and can share the binary (pkg.tar.xz).

#18 Re: System Administration » LXDE display manager refuse to start, I always have to type "startx" » 2018-12-15 07:08:18

No, vramswap never worked for me, I tried to get it work when I used a graphics card with 256 MB video ram.  Now I replaced it with a 64 MB graphics card. How can I save the messages from the boot screen, the Ctrl+Alt+F1 treminal?

#19 System Administration » LXDE display manager refuse to start, I always have to type "startx" » 2018-12-13 00:25:58

anselm
Replies: 3

When I boot my system, the usual LXDE GUI won't appear, and the terminal messages get stuck. The last message is: "Reached target graphical interface". Then I have to switch to another terminal (for example CTRL+ALT+F2) and type "startx" to start the GUI. After that everything works properly, as usual. This would be a minor problem, which doesn't need intervention, but the further problem is that my system after that seems to be less responsive, compared to the former state in the past, when the LXDE display manager was loaded automatically, without typing "startx" at the 2nd terminal. Where should I search for the root of the problem?


When I type "systemctl --failed", I get:

  UNIT                  LOAD   ACTIVE SUB    DESCRIPTION                            
● dhcpcd@enp2s3.service loaded failed failed dhcpcd on enp2s3                       
● logrotate.service     loaded failed failed Rotate log files                       
● lxdm.service          loaded failed failed LXDE Display Manager                   
● nfs-idmapd.service    loaded failed failed NFSv4 ID-name mapping service          
● nfs-mountd.service    loaded failed failed NFS Mount Daemon                       
● rpc-statd.service     loaded failed failed NFS status monitor for NFSv2/3 locking.
● vnstat.service        loaded failed failed vnStat network traffic monitor         
● vramswap.service      loaded failed failed Swap on Video RAM                      

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

8 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

#20 Servers & Networking » Apache crashes when logrotate happens » 2018-06-24 00:22:01

anselm
Replies: 3

My apache server simply crashed. From /var/log/httpd/error.log.1:

[Sun Jun 24 00:00:31.279180 2018] [mpm_event:notice] [pid 5697:tid 3082519104] AH00493: SIGUSR1 received.  Doing graceful restart
httpd: Syntax error on line 154 of /etc/httpd/conf/httpd.conf: Cannot load modules/mod_mpm_event.so into server: /etc/httpd/modules/mod_mpm_event.so: undefined symbol: ap_queue_info_wait_for_idler

The timestamp is very close to the "mtime" of rotated logfile:

> stat /var/log/httpd/error_log.1 

  File: error_log.1
  Size: 5799970   	Blocks: 11360      IO Block: 4096   regular file
Device: 801h/2049d	Inode: 393350      Links: 1
Access: (0644/-rw-r--r--)  Uid: (    0/    root)   Gid: (    0/    root)
Access: 2018-06-24 00:02:00.916603907 +0200
Modify: 2018-06-24 00:00:32.593148937 +0200
Change: 2018-06-24 00:00:32.593148937 +0200
 Birth: -

#21 Re: Artwork, Screenshots & Setups » Xorg.conf for older nVidia cards » 2018-06-22 23:34:25

What a gotcha, 2nd benchmark produced even better results than with the accelerated xorg.conf:

GtkPerf 0.40 - Starting testing: Sat Jun 23 01:30:52 2018

GtkEntry - time:  0.10
GtkComboBox - time:  1.07
GtkComboBoxEntry - time:  0.79
GtkSpinButton - time:  0.18
GtkProgressBar - time:  0.12
GtkToggleButton - time:  0.22
GtkCheckButton - time:  0.14
GtkRadioButton - time:  0.25
GtkTextView - Add text - time:  0.67
GtkTextView - Scroll - time:  0.27
GtkDrawingArea - Lines - time:  0.94
GtkDrawingArea - Circles - time:  1.15
GtkDrawingArea - Text - time:  6.72
GtkDrawingArea - Pixbufs - time:  0.87
 --- 
Total time: 13.51

#22 Re: Artwork, Screenshots & Setups » Xorg.conf for older nVidia cards » 2018-06-22 23:10:04

I did a quick benchmark with "gtkperf", 1st belongs to the accelerated xorg.conf:

GtkEntry - time:  0.15
GtkComboBox - time:  1.32
GtkComboBoxEntry - time:  1.03
GtkSpinButton - time:  0.26
GtkProgressBar - time:  0.18
GtkToggleButton - time:  0.32
GtkCheckButton - time:  0.21
GtkRadioButton - time:  0.33
GtkTextView - Add text - time:  0.79
GtkTextView - Scroll - time:  0.34
GtkDrawingArea - Lines - time:  1.07
GtkDrawingArea - Circles - time:  1.38
GtkDrawingArea - Text - time:  7.62
GtkDrawingArea - Pixbufs - time:  1.03
 --- 
Total time: 16.04

#23 Re: Artwork, Screenshots & Setups » Xorg.conf for older nVidia cards » 2018-06-22 19:07:53

snODklC.jpg

A dirty old machine:

gQVsgBS.jpg

One can spot an ancient Maxtor 80 MB (!) hard disk on the first picture from 1992. I simply used it as some kind of "keel", ballast to reduce chassis vibration caused by a previous IDE hard drive. I also applied plastic foam pieces with medical tape for the same reason. Nowadays I can achieve the same effect with "hdparm" utility and hard disk drive noise management... After the highly vibrating and noisy IDE hard disk died, I simply put my new Western Digital Blue 7200 RPM, 500 GB SATA hard disk on the top of my IDE DVD burner without using any screws, onto a folded newspaper, to reduce vibration. We can see the passively cooled AGP video card, Geforce MX440. I had previously a passive FX5200 too, but unfortunately it abruptly died without any particular reason. I also have a Sound Blaster 16 and a minimalistic network card connected to the motherboard PCI channels. However there are integrated network card and sound card on the motherboard too. I use them when needed as spare parts in case of failure. The adjustable Zalman cooler always works on the lowest spin rate, I never adjust the regulator which is tied with some wire onto the rear of the chassis. Sometimes I use an ordinary paintbrush together with the vacuum cleaner to get rid of the laying dust. The chassis has a handhold on the top, I choosed this chassis when I bought the computer in 2002 exactly for this reason: to be able more easily to carry home by bus and train. Since then everything was replaced or upgraded except the chassis, the mobo and the CPU. This is my main computer, as I have an even older one: KOB KT266a FDSX mainboard, 2 GB RAM @ 133 Mhz, AMD Athlon XP 1800, 80 GB Maxtor HDD, I use it only as a spare machine in case of failure. However I am unable to use a decent web browser on the older machine due to the lack of SSE2 instruction set of the AMD Athlon.

#24 Artwork, Screenshots & Setups » Xorg.conf for older nVidia cards » 2018-06-22 00:47:48

anselm
Replies: 6

I have a 16 years old computer: Intel D865PERL mainboard, 2 GB RAM, 2.4 GHz hyperthread CPU, Geforce MX440 64 MB (4x AGP), 21.5" Philips LCD W-LED display.
My PC was usable for everyday tasks, web browsing, programming, avisynth, etc, but sometimes was a bit slowish, especially web browsing with Firefox or Pale Moon. Opera was OK.
Now I managed to setup a more optimized /etc/X11/xorg.conf file, and the visual performance has been greatly improved: "glxgears" becnhmarks shows FPS rates from previous xorg.conf 4 FPS increased to 500 FPS. However I don't run OpenGL games, nor other 3D applications, except Google Earth. Animations on websites became more smooth, even flash ads looks better, not to mention youtube videos, now they play smoothly.

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0" 0 0
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
EndSection

Section "Files"
	ModulePath "/usr/lib/xorg/modules/extensions/nvidia"
	ModulePath "/usr/lib/xorg/modules/drivers"
	ModulePath "/usr/lib/xorg/modules"
EndSection

Section "Module"
	Load "dbe"
	Load "extmod"
	Load "type1"
	Load "freetype"
	Load "glx"
EndSection


Section "ServerFlags"
    Option  "Xinerama" "0"
    Option "AIGLX" "on"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       30.0 - 110.0
    VertRefresh     50.0 - 150.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName "GeForce4 MX 440"
    Option "RenderAccel" "true"
    Option "AccelMethod" "EXA"
    Option "MigrationHeuristic"  "greedy"
    Option 		"InitialPixmapPlacement" "2"
    Option 		"GlyphCache" "1"
EndSection


Section "Screen"
	Identifier "Screen0"
	Device "Videocard0"
	Monitor "Monitor0"
	DefaultDepth 24
	Option "metamodes" "CRT-0: 1024x768_75 +0+0"
	Option "AddARGBGLXVisuals" "True"
	Option "DisableGLXRootClipping" "True"
	SubSection "Display"
		Depth 24
		Modes "1920x1080" "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

Section "Extensions"
    Option    "Composite"    "Disable"
EndSection

Happy experimenting with the settings!


/var/log/Xorg.0.log

[    82.072] 
X.Org X Server 1.12.4
Release Date: 2012-08-27
[    82.109] X Protocol Version 11, Revision 0
[    82.121] Build Operating System: Linux 3.12.6-1-ARCH i686 
[    82.133] Current Operating System: Linux archlinux 4.10.13-1-ARCH #1 SMP PREEMPT Thu Apr 27 12:35:30 CEST 2017 i686
[    82.134] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=c7e2c928-1839-4c39-b5cc-836a3cea6167 rw quiet debug ignore_loglevel earlyprintk=vga,keep log_buf_len=16M memory_corruption_check=1 bootmem_debug memtest acpi=ht ht=on maxcpus=1
[    82.176] Build Date: 05 January 2014  02:33:32PM
[    82.193]  
[    82.208] Current version of pixman: 0.34.0
[    82.242] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    82.242] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    82.323] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 22 01:28:13 2018
[    82.360] (==) Using config file: "/etc/X11/xorg.conf"
[    82.382] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    82.446] (==) ServerLayout "Layout0"
[    82.446] (**) |-->Screen "Screen0" (0)
[    82.446] (**) |   |-->Monitor "Monitor0"
[    82.447] (**) |   |-->Device "Videocard0"
[    82.447] (**) |-->Input Device "Keyboard0"
[    82.447] (**) |-->Input Device "Mouse0"
[    82.447] (**) Option "Xinerama" "0"
[    82.447] (**) Option "AIGLX" "on"
[    82.447] (==) Automatically adding devices
[    82.447] (==) Automatically enabling devices
[    82.555] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    82.555] (**) ModulePath set to "/usr/lib/xorg/modules/extensions/nvidia,/usr/lib/xorg/modules/drivers,/usr/lib/xorg/modules"
[    82.555] (**) Extension "Composite" is disabled
[    82.555] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[    82.555] (WW) Disabling Keyboard0
[    82.555] (WW) Disabling Mouse0
[    82.555] (II) Loader magic: 0x821e5a0
[    82.555] (II) Module ABI versions:
[    82.555] 	X.Org ANSI C Emulation: 0.4
[    82.555] 	X.Org Video Driver: 12.1
[    82.555] 	X.Org XInput driver : 16.0
[    82.555] 	X.Org Server Extension : 6.0
[    82.558] (--) PCI:*(0:1:0:0) 10de:0171:0000:0000 rev 163, Mem @ 0xfc000000/16777216, 0xe8000000/134217728, 0xf0000000/524288, BIOS @ 0x????????/131072
[    82.558] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    82.558] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[    82.558] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[    82.558] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[    82.558] (II) "record" will be loaded by default.
[    82.558] (II) "dri" will be loaded by default.
[    82.558] (II) "dri2" will be loaded by default.
[    82.558] (II) LoadModule: "dbe"
[    82.634] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    82.640] (II) Module dbe: vendor="X.Org Foundation"
[    82.640] 	compiled for 1.12.4, module version = 1.0.0
[    82.640] 	Module class: X.Org Server Extension
[    82.640] 	ABI class: X.Org Server Extension, version 6.0
[    82.640] (II) Loading extension DOUBLE-BUFFER
[    82.640] (II) LoadModule: "extmod"
[    82.641] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    82.652] (II) Module extmod: vendor="X.Org Foundation"
[    82.653] 	compiled for 1.12.4, module version = 1.0.0
[    82.653] 	Module class: X.Org Server Extension
[    82.653] 	ABI class: X.Org Server Extension, version 6.0
[    82.653] (II) Loading extension MIT-SCREEN-SAVER
[    82.653] (II) Loading extension XFree86-VidModeExtension
[    82.653] (II) Loading extension XFree86-DGA
[    82.653] (II) Loading extension DPMS
[    82.653] (II) Loading extension XVideo
[    82.653] (II) Loading extension XVideo-MotionCompensation
[    82.653] (II) Loading extension X-Resource
[    82.653] (II) LoadModule: "glx"
[    82.653] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    83.048] (II) Module glx: vendor="NVIDIA Corporation"
[    83.048] 	compiled for 4.0.2, module version = 1.0.0
[    83.048] 	Module class: X.Org Server Extension
[    83.048] (II) NVIDIA GLX Module  96.43.23  Fri Aug 31 15:03:31 PDT 2012
[    83.048] (II) Loading extension GLX
[    83.048] (II) LoadModule: "record"
[    83.049] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    83.070] (II) Module record: vendor="X.Org Foundation"
[    83.070] 	compiled for 1.12.4, module version = 1.13.0
[    83.070] 	Module class: X.Org Server Extension
[    83.070] 	ABI class: X.Org Server Extension, version 6.0
[    83.070] (II) Loading extension RECORD
[    83.070] (II) LoadModule: "dri"
[    83.070] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    83.091] (II) Module dri: vendor="X.Org Foundation"
[    83.091] 	compiled for 1.12.4, module version = 1.0.0
[    83.091] 	ABI class: X.Org Server Extension, version 6.0
[    83.091] (II) Loading extension XFree86-DRI
[    83.091] (II) LoadModule: "dri2"
[    83.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    83.093] (II) Module dri2: vendor="X.Org Foundation"
[    83.093] 	compiled for 1.12.4, module version = 1.2.0
[    83.093] 	ABI class: X.Org Server Extension, version 6.0
[    83.093] (II) Loading extension DRI2
[    83.093] (II) LoadModule: "nvidia"
[    83.093] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    83.152] (II) Module nvidia: vendor="NVIDIA Corporation"
[    83.152] 	compiled for 4.0.2, module version = 1.0.0
[    83.152] 	Module class: X.Org Video Driver
[    83.184] (II) NVIDIA dlloader X Driver  96.43.23  Fri Aug 31 14:57:26 PDT 2012
[    83.184] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    83.184] (++) using VT number 4

[    83.184] (II) Loading sub module "fb"
[    83.184] (II) LoadModule: "fb"
[    83.185] (II) Loading /usr/lib/xorg/modules/libfb.so
[    83.193] (II) Module fb: vendor="X.Org Foundation"
[    83.193] 	compiled for 1.12.4, module version = 1.0.0
[    83.193] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    83.193] (II) Loading sub module "ramdac"
[    83.194] (II) LoadModule: "ramdac"
[    83.194] (II) Module "ramdac" already built-in
[    83.214] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[    83.214] (==) NVIDIA(0): RGB weight 888
[    83.214] (==) NVIDIA(0): Default visual is TrueColor
[    83.214] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    83.214] (**) NVIDIA(0): Option "RenderAccel" "true"
[    83.214] (**) NVIDIA(0): Option "MetaModes" "CRT-0: 1024x768_75 +0+0"
[    83.215] (**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
[    83.215] (**) NVIDIA(0): Option "DisableGLXRootClipping" "True"
[    83.215] (**) NVIDIA(0): Enabling RENDER acceleration
[    83.967] (II) NVIDIA(0): NVIDIA GPU GeForce4 MX 440 at PCI:1:0:0 (GPU-0)
[    83.967] (--) NVIDIA(0): Memory: 65536 kBytes
[    83.967] (--) NVIDIA(0): VideoBIOS: 04.17.00.63.a9
[    83.967] (II) NVIDIA(0): Detected AGP rate: 4X
[    83.967] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[    83.967] (--) NVIDIA(0): Connected display device(s) on GeForce4 MX 440 at PCI:1:0:0:
[    83.967] (--) NVIDIA(0):     Philips PHL 223V5 (CRT-0)
[    83.967] (--) NVIDIA(0): Philips PHL 223V5 (CRT-0): 350.0 MHz maximum pixel clock
[    83.967] (II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
[    83.967] (II) NVIDIA(0): Assigned Display Device: CRT-0
[    83.967] (II) NVIDIA(0): Validated modes:
[    83.968] (II) NVIDIA(0):     "CRT-0:1024x768_75+0+0"
[    83.968] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    83.968] (--) NVIDIA(0): DPI set to (54, 72); computed from "UseEdidDpi" X config
[    83.968] (--) NVIDIA(0):     option
[    83.968] (WW) NVIDIA(0): 32-bit ARGB GLX visuals require the Composite extension.
[    83.968] (II) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[    83.968] (--) Depth 24 pixmap format is 32 bpp
[    83.969] (II) NVIDIA(0): Initialized GART.
[    84.112] (II) NVIDIA(0): Setting mode "CRT-0:1024x768_75+0+0"
[    84.315] (II) Loading extension NV-GLX
[    84.334] (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
[    84.366] (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
[    84.366] (==) NVIDIA(0): Backing store disabled
[    84.366] (==) NVIDIA(0): Silken mouse enabled
[    84.366] (**) NVIDIA(0): DPMS enabled
[    84.370] (II) Loading extension NV-CONTROL
[    84.370] (WW) NVIDIA(0): Option "AccelMethod" is not used
[    84.370] (WW) NVIDIA(0): Option "MigrationHeuristic" is not used
[    84.370] (WW) NVIDIA(0): Option "InitialPixmapPlacement" is not used
[    84.370] (WW) NVIDIA(0): Option "GlyphCache" is not used
[    84.370] (==) RandR enabled
[    84.370] (II) Initializing built-in extension Generic Event Extension
[    84.370] (II) Initializing built-in extension SHAPE
[    84.370] (II) Initializing built-in extension MIT-SHM
[    84.370] (II) Initializing built-in extension XInputExtension
[    84.370] (II) Initializing built-in extension XTEST
[    84.370] (II) Initializing built-in extension BIG-REQUESTS
[    84.370] (II) Initializing built-in extension SYNC
[    84.370] (II) Initializing built-in extension XKEYBOARD
[    84.370] (II) Initializing built-in extension XC-MISC
[    84.370] (II) Initializing built-in extension SECURITY
[    84.370] (II) Initializing built-in extension XINERAMA
[    84.370] (II) Initializing built-in extension XFIXES
[    84.370] (II) Initializing built-in extension RENDER
[    84.370] (II) Initializing built-in extension RANDR
[    84.370] (II) Initializing built-in extension COMPOSITE
[    84.370] (II) Initializing built-in extension DAMAGE
[    84.378] (II) Initializing extension GLX
[    85.129] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    85.130] (**) Power Button: Applying InputClass "system-keyboard"
[    85.130] (**) Power Button: Applying InputClass "Keyboard-layout"
[    85.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    85.130] (II) LoadModule: "evdev"
[    85.130] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    85.149] (II) Module evdev: vendor="X.Org Foundation"
[    85.149] 	compiled for 1.12.3.901, module version = 2.7.3
[    85.149] 	Module class: X.Org XInput Driver
[    85.149] 	ABI class: X.Org XInput driver, version 16.0
[    85.149] (II) Using input driver 'evdev' for 'Power Button'
[    85.149] (**) Power Button: always reports core events
[    85.149] (**) evdev: Power Button: Device: "/dev/input/event4"
[    85.149] (--) evdev: Power Button: Vendor 0 Product 0x1
[    85.149] (--) evdev: Power Button: Found keys
[    85.149] (II) evdev: Power Button: Configuring as keyboard
[    85.149] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    85.149] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    85.149] (**) Option "xkb_rules" "evdev"
[    85.149] (**) Option "xkb_model" "pc105"
[    85.149] (**) Option "xkb_layout" "hu"
[    85.149] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    85.269] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    85.273] (**) Sleep Button: Applying InputClass "system-keyboard"
[    85.273] (**) Sleep Button: Applying InputClass "Keyboard-layout"
[    85.273] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    85.273] (II) Using input driver 'evdev' for 'Sleep Button'
[    85.273] (**) Sleep Button: always reports core events
[    85.273] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[    85.273] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    85.273] (--) evdev: Sleep Button: Found keys
[    85.273] (II) evdev: Sleep Button: Configuring as keyboard
[    85.273] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event3"
[    85.273] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    85.273] (**) Option "xkb_rules" "evdev"
[    85.273] (**) Option "xkb_model" "pc105"
[    85.273] (**) Option "xkb_layout" "hu"
[    85.273] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    85.275] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    85.275] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    85.275] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard-layout"
[    85.275] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    85.275] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    85.275] (**) AT Translated Set 2 keyboard: always reports core events
[    85.275] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    85.275] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    85.275] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    85.275] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    85.275] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    85.275] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[    85.275] (**) Option "xkb_rules" "evdev"
[    85.275] (**) Option "xkb_model" "pc105"
[    85.275] (**) Option "xkb_layout" "hu"
[    85.275] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    85.280] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event2)
[    85.280] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[    85.280] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[    85.280] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[    85.280] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event2"
[    85.280] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[    85.280] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[    85.280] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[    85.280] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[    85.280] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[    85.280] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[    85.280] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[    85.280] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[    85.280] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    85.280] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input3/event2"
[    85.280] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[    85.281] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[    85.281] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[    85.281] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[    85.281] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[    85.281] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[    85.282] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[    85.282] (II) No input driver specified, ignoring this device.
[    85.282] (II) This device may have been added with another device file.
[    85.282] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[    85.282] (II) No input driver specified, ignoring this device.
[    85.282] (II) This device may have been added with another device file.
[   156.284] (II) NVIDIA(0): Setting mode "1024x768_60"
[   764.898] Warning: Xalloc: requesting unpleasantly large amount of memory: 0 bytes.
[   792.977] Warning: Xalloc: requesting unpleasantly large amount of memory: 0 bytes.
[   838.704] Warning: Xalloc: requesting unpleasantly large amount of memory: 0 bytes.

#25 Re: Creating/Maintaining Packages » Which package to install to get mp3 playing work in Opera 45 ? » 2018-06-19 16:09:49

The needed libffmpeg.so can be taken from this RPM ( can be unpacked by 7zip )

http://mirror.yandex.ru/fedora/russianfedora/russianfedora/nonfree/fedora/development/rawhide/i386/os//opera-stable-libffmpeg-58.0.3029.110-1.fc27.R.i686.rpm

And should be copied into "/usr/lib/opera/lib_extra/". After that mp3 playback works again in Opera 45 / 32 bit.

Board footer

Powered by FluxBB