You are not logged in.

#1 2020-09-24 19:44:21

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Xorg problem on VIA S3G UniChrome Pro

I have an old Fujitsu-Siemens Amilo Pro V2055 laptop, that I have installed arch linux on. I installed the xf86-video-openchrome drivers and unichrome-dri and mesa packages. But when I try to turn startx I get this:

[   864.590] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   864.592] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[   864.598] Build Operating System: Linux Arch Linux
[   864.603] Current Operating System: Linux oldtop 5.8.5-arch1-1.0 #1 SMP PREEMPT Wed, 02 Sep 2020 18:41:40 +0000 i686
[   864.603] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d4948ffe-a401-44bc-8bbb-ccf2d76b1e68 rw loglevel=3 quiet
[   864.615] Build Date: 02 September 2020  02:44:38PM
[   864.619]  
[   864.624] Current version of pixman: 0.40.0
[   864.634] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   864.634] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   864.658] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Sep 24 21:13:10 2020
[   864.666] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   864.673] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   864.674] (==) No Layout section.  Using the first Screen section.
[   864.674] (==) No screen section available. Using defaults.
[   864.674] (**) |-->Screen "Default Screen Section" (0)
[   864.674] (**) |   |-->Monitor "<default monitor>"
[   864.674] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   864.674] (**) |   |-->Device ""
[   864.674] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   864.674] (==) Automatically adding devices
[   864.674] (==) Automatically enabling devices
[   864.674] (==) Automatically adding GPU devices
[   864.674] (==) Automatically binding GPU devices
[   864.674] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   864.674] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   864.674] 	Entry deleted from font path.
[   864.674] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   864.674] 	Entry deleted from font path.
[   864.674] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   864.675] 	Entry deleted from font path.
[   864.675] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   864.675] 	Entry deleted from font path.
[   864.675] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   864.675] (==) ModulePath set to "/usr/lib/xorg/modules"
[   864.675] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   864.675] (II) Module ABI versions:
[   864.675] 	X.Org ANSI C Emulation: 0.4
[   864.675] 	X.Org Video Driver: 24.1
[   864.675] 	X.Org XInput driver : 24.1
[   864.675] 	X.Org Server Extension : 10.0
[   864.676] (++) using VT number 1

[   864.681] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   864.688] (--) PCI:*(1@0:0:0) 1106:3344:1734:10ca rev 1, Mem @ 0xf0000000/67108864, 0xf4000000/16777216, BIOS @ 0x????????/131072
[   864.688] (II) LoadModule: "glx"
[   864.688] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   864.691] (II) Module glx: vendor="X.Org Foundation"
[   864.692] 	compiled for 1.20.9, module version = 1.0.0
[   864.692] 	ABI class: X.Org Server Extension, version 10.0
[   864.692] (II) LoadModule: "openchrome"
[   864.692] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[   864.692] (II) Module openchrome: vendor="https://www.freedesktop.org/wiki/Openchrome/"
[   864.692] 	compiled for 1.20.8, module version = 0.6.0
[   864.692] 	Module class: X.Org Video Driver
[   864.692] 	ABI class: X.Org Video Driver, version 24.1
[   864.692] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
	KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
	PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
	CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
	P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[   864.693] (!!) VIA Technologies does not support this driver in any way.
[   864.693] (!!) For support, please refer to https://www.freedesktop.org/wiki/Openchrome/.
[   864.693] (!!) (openchrome 0.6.0 release)
[   864.693] (II) CHROME(0): viaPreInit
[   864.693] (II) CHROME(0): VIAGetRec
[   864.693] (--) CHROME(0): Chipset: P4M800 Pro / VN800 / CN700
[   864.693] (--) CHROME(0): Chipset revision: 0
[   864.696] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[   864.696] (II) Loading sub module "vgahw"
[   864.696] (II) LoadModule: "vgahw"
[   864.696] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   864.696] (II) Module vgahw: vendor="X.Org Foundation"
[   864.696] 	compiled for 1.20.9, module version = 0.1.0
[   864.696] 	ABI class: X.Org Video Driver, version 24.1
[   864.696] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[   864.696] (II) CHROME(0): Entered viaMapMMIO.
[   864.696] (--) CHROME(0): Mapping MMIO at address 0xF4000000 with size 52 KB.
[   864.696] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xF4200000 with size 2048 KB.
[   864.696] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[   864.697] (EE) CHROME(0): Unable to map the frame buffer.
Error: Invalid argument (22)
[   864.697] (II) CHROME(0): Exiting viaMapMMIO.
[   864.697] (II) CHROME(0): VIAFreeRec
[   864.697] (II) CHROME(0): VIAFreeScreen
[   864.697] (II) CHROME(0): VIAFreeRec
[   864.697] (II) UnloadModule: "openchrome"
[   864.697] (II) UnloadSubModule: "vgahw"
[   864.697] (II) Unloading vgahw
[   864.697] (EE) Screen(s) found, but none have a usable configuration.
[   864.697] (EE) 
Fatal server error:
[   864.697] (EE) no screens found(EE) 
[   864.697] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   864.697] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   864.697] (EE) 
[   864.713] (EE) Server terminated with error (1). Closing log file.

Offline

#2 2020-09-24 22:01:12

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 952

Re: Xorg problem on VIA S3G UniChrome Pro

The errors seem to start at:

[   864.696] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[   864.697] (EE) CHROME(0): Unable to map the frame buffer.
Error: Invalid argument (22)

It's not clear to me what argument it's talking about.  After that point it just unwinds in a relatively clean manner.  That frame buffer seems to be the maximum size of the graphics adaptor, which seems a reasonable default.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#3 2020-09-25 09:41:22

abaumann
Administrator
From: Zurich
Registered: 2019-11-14
Posts: 360
Website

Re: Xorg problem on VIA S3G UniChrome Pro

Before I see a:

[   864.696] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory

So, the DRM module for VIA is not enabled in the kernel ("# CONFIG_DRM_VIA is not set").

You are on pentium4 or on i686? Do you have a linux or a linux-lts kernel? Though it makes sense to enable it in both
kernels..

Offline

#4 2020-09-25 14:27:13

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Re: Xorg problem on VIA S3G UniChrome Pro

abaumann wrote:

Before I see a:
You are on pentium4 or on i686? Do you have a linux or a linux-lts kernel? Though it makes sense to enable it in both
kernels..

I'm on neither, it's Intel Celeron M. I have linux kernel.

Last edited by Raudonkepuris (2020-09-25 14:34:43)

Offline

#5 2020-09-25 15:21:36

abaumann
Administrator
From: Zurich
Registered: 2019-11-14
Posts: 360
Website

Re: Xorg problem on VIA S3G UniChrome Pro

Ah, sorry. I was not clear. I meant the Archlinux32 architecture.

pacman -Qi pacman | grep Architecture

Doesn't matter, I triggered all kernels on all architectures.

Offline

#6 2020-09-25 17:10:42

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Re: Xorg problem on VIA S3G UniChrome Pro

abaumann wrote:

Before I see a:

[   864.696] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory

So, the DRM module for VIA is not enabled in the kernel ("# CONFIG_DRM_VIA is not set").

How do I exactly enable the DRM module in the kernel?

Offline

#7 2020-09-25 21:16:39

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 952

Re: Xorg problem on VIA S3G UniChrome Pro

It's a compile time option.  You could build the kernel yourself, or the best option I reckon is to wait for abumann's triggered rebuilds to get uploaded to whatever mirror you're using, so just do an upgrade with # pacman -Syu and see if they're ready yet.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#8 2020-09-26 20:38:40

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Re: Xorg problem on VIA S3G UniChrome Pro

I installed the linux-lts 5.4.67-1.0 kernel but still got this:

[    30.430] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    30.451] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[    30.451] Build Operating System: Linux Arch Linux
[    30.452] Current Operating System: Linux oldtop 5.4.67-1.0-lts #1 SMP Sat, 26 Sep 2020 11:52:01 +0000 i686
[    30.452] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=d4948ffe-a401-44bc-8bbb-ccf2d76b1e68 rw loglevel=3 quiet
[    30.453] Build Date: 02 September 2020  02:44:38PM
[    30.453]  
[    30.453] Current version of pixman: 0.40.0
[    30.454] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    30.454] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    30.456] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 25 04:32:36 2020
[    30.553] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    30.553] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    30.611] (==) No Layout section.  Using the first Screen section.
[    30.611] (==) No screen section available. Using defaults.
[    30.611] (**) |-->Screen "Default Screen Section" (0)
[    30.611] (**) |   |-->Monitor "<default monitor>"
[    30.611] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    30.611] (**) |   |-->Device ""
[    30.611] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    30.611] (==) Automatically adding devices
[    30.611] (==) Automatically enabling devices
[    30.611] (==) Automatically adding GPU devices
[    30.611] (==) Automatically binding GPU devices
[    30.611] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    30.653] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    30.653] 	Entry deleted from font path.
[    30.654] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    30.654] 	Entry deleted from font path.
[    30.654] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    30.654] 	Entry deleted from font path.
[    30.654] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    30.654] 	Entry deleted from font path.
[    30.699] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[    30.699] (==) ModulePath set to "/usr/lib/xorg/modules"
[    30.699] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    30.699] (II) Module ABI versions:
[    30.699] 	X.Org ANSI C Emulation: 0.4
[    30.699] 	X.Org Video Driver: 24.1
[    30.699] 	X.Org XInput driver : 24.1
[    30.699] 	X.Org Server Extension : 10.0
[    30.701] (++) using VT number 1

[    30.705] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    30.711] (--) PCI:*(1@0:0:0) 1106:3344:1734:10ca rev 1, Mem @ 0xf0000000/67108864, 0xf4000000/16777216, BIOS @ 0x????????/131072
[    30.711] (II) LoadModule: "glx"
[    30.746] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    30.841] (II) Module glx: vendor="X.Org Foundation"
[    30.841] 	compiled for 1.20.9, module version = 1.0.0
[    30.841] 	ABI class: X.Org Server Extension, version 10.0
[    30.841] (II) LoadModule: "openchrome"
[    30.853] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[    30.880] (II) Module openchrome: vendor="https://www.freedesktop.org/wiki/Openchrome/"
[    30.880] 	compiled for 1.20.8, module version = 0.6.0
[    30.880] 	Module class: X.Org Video Driver
[    30.881] 	ABI class: X.Org Video Driver, version 24.1
[    30.881] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
	KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
	PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
	CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
	P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[    30.881] (!!) VIA Technologies does not support this driver in any way.
[    30.881] (!!) For support, please refer to https://www.freedesktop.org/wiki/Openchrome/.
[    30.881] (!!) (openchrome 0.6.0 release)
[    30.881] (II) CHROME(0): viaPreInit
[    30.881] (II) CHROME(0): VIAGetRec
[    30.881] (--) CHROME(0): Chipset: P4M800 Pro / VN800 / CN700
[    30.881] (--) CHROME(0): Chipset revision: 0
[    30.883] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory
[    30.884] (II) Loading sub module "vgahw"
[    30.884] (II) LoadModule: "vgahw"
[    30.884] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    30.892] (II) Module vgahw: vendor="X.Org Foundation"
[    30.892] 	compiled for 1.20.9, module version = 0.1.0
[    30.892] 	ABI class: X.Org Video Driver, version 24.1
[    30.892] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[    30.892] (II) CHROME(0): Entered viaMapMMIO.
[    30.892] (--) CHROME(0): Mapping MMIO at address 0xF4000000 with size 52 KB.
[    30.892] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xF4200000 with size 2048 KB.
[    30.892] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[    30.892] (EE) CHROME(0): Unable to map the frame buffer.
Error: Invalid argument (22)
[    30.892] (II) CHROME(0): Exiting viaMapMMIO.
[    30.892] (II) CHROME(0): VIAFreeRec
[    30.892] (II) CHROME(0): VIAFreeScreen
[    30.893] (II) CHROME(0): VIAFreeRec
[    30.893] (II) UnloadModule: "openchrome"
[    30.893] (II) UnloadSubModule: "vgahw"
[    30.893] (II) Unloading vgahw
[    30.893] (EE) Screen(s) found, but none have a usable configuration.
[    30.893] (EE) 
Fatal server error:
[    30.893] (EE) no screens found(EE) 
[    30.893] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    30.893] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    30.893] (EE) 
[    30.909] (EE) Server terminated with error (1). Closing log file.

Could it be that my laptops chipset is not compatible? I don't know the exact chipset, it just says "VIA UniChrome Pro"

Offline

#9 2020-09-26 22:13:31

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 952

Re: Xorg problem on VIA S3G UniChrome Pro

It could be.  You've installed the first build of that LTS kernel there, which isn't that new, so I wouldn't expect to contain abumann's proposed fix though.  I note there is a 1.1 build of the 5.8.10 kernel which might be his build or it might not.  It seems to have been built a couple of hours before his post saying he's rescheduled it, so then again maybe not.  That's all in the testing repos though, so you'll need to enable them in order to test this.

I suspect you've got a VIA C3 graphics chipset there, from my recollection of ddging about your laptop.  I'm not sure that tells us much on its own though.

So TLDR; I think the fix isn't ready yet.  Hold your fire.  Spend the time learning tmux and links I reckon.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#10 2020-09-27 09:36:33

abaumann
Administrator
From: Zurich
Registered: 2019-11-14
Posts: 360
Website

Re: Xorg problem on VIA S3G UniChrome Pro

Do you have kernel 5.8.10 (linux)? The package usually takes a while to build and get throught staging/testing.

What's the output of:
zgrep DRM_VIA /proc/config.gz
(it should say CONFIG_DRM_VIA=m)

Check the dmesg output to see if the DRM module has been loaded.

Check with lsmod if the DRM module vor VIA is loaded.

Eventually load the module by hand:

modprobe -v via
insmod /lib/modules/5.8.10-arch1-1.1/kernel/drivers/gpu/drm/via/via.ko.xz

Offline

#11 2020-09-27 15:44:02

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Re: Xorg problem on VIA S3G UniChrome Pro

I'm on kernel 5.8.10-arch1-1.1.

Output of
zgrep DRM_VIA /proc/config.gz
is
CONFIG_DRM_VIA=m

I can't find anything in dmesg that would explicitly state that DRM module for VIA is loaded but here's the full output

[    0.000000] Linux version 5.8.10-arch1-1.1 (linux@archlinux) (gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35) #1 SMP PREEMPT Fri, 25 Sep 2020 08:48:44 +0000
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] Disabled fast string operations
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000005be8ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000005be90000-0x000000005bea0fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000005bea1000-0x000000005befffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000005bf00000-0x000000005fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffe0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000105befffff] usable
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.34 present.
[    0.000000] DMI: FUJITSU SIEMENS AMILO PRO V2055/AMILO PRO V2055, BIOS 1.0C-2A16-8A20 07/21/2006
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1474.054 MHz processor
[    0.007748] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.007753] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.007765] last_pfn = 0x5be90 max_arch_pfn = 0x100000
[    0.007780] MTRR default type: uncachable
[    0.007783] MTRR fixed ranges enabled:
[    0.007786]   00000-9FFFF write-back
[    0.007788]   A0000-BFFFF uncachable
[    0.007791]   C0000-C7FFF write-protect
[    0.007793]   C8000-DFFFF uncachable
[    0.007795]   E0000-FFFFF write-protect
[    0.007797] MTRR variable ranges enabled:
[    0.007801]   0 base 000000000 mask FC0000000 write-back
[    0.007804]   1 base 040000000 mask FE0000000 write-back
[    0.007806]   2 base 05BF00000 mask FFFF00000 uncachable
[    0.007809]   3 base 05C000000 mask FFC000000 uncachable
[    0.007811]   4 disabled
[    0.007812]   5 disabled
[    0.007814]   6 disabled
[    0.007816]   7 disabled
[    0.009161] x86/PAT: PAT not supported by the CPU.
[    0.009420] total RAM covered: 1471M
[    0.010473] Found optimal setting for mtrr clean up
[    0.010477]  gran_size: 64K 	chunk_size: 128M 	num_reg: 4  	lose cover RAM: 0G
[    0.011018] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.019977] found SMP MP-table at [mem 0x000f8f80-0x000f8f8f]
[    0.043021] check: Scanning 1 areas for low memory corruption
[    0.043024] initial memory mapped: [mem 0x00000000-0x163fffff]
[    0.043096] RAMDISK: [mem 0x36efd000-0x37775fff]
[    0.043099] Allocated new RAMDISK: [mem 0x35b85000-0x363fd398]
[    0.060024] Move RAMDISK from [mem 0x36efd000-0x37775398] to [mem 0x35b85000-0x363fd398]
[    0.060044] ACPI: Early table checksum verification disabled
[    0.060057] ACPI: RSDP 0x00000000000F8F50 000014 (v00 PTLTD )
[    0.060065] ACPI: RSDT 0x000000005BE9CDDB 00002C (v01 PTLTD    RSDT   06040000  LTP 00000000)
[    0.060080] ACPI: FACP 0x000000005BEA0F3C 000074 (v01 VN800  FIC_7WP  06040000 PTL_ 000F4240)
[    0.060095] ACPI: DSDT 0x000000005BE9CE07 004135 (v01 FIC    LM7W+    06040000 MSFT 0100000E)
[    0.060103] ACPI: FACS 0x000000005BEA1FC0 000040
[    0.060110] ACPI: APIC 0x000000005BEA0FB0 000050 (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.060142] ACPI: Local APIC address 0xfee00000
[    0.060152] 602MB HIGHMEM available.
[    0.060155] 867MB LOWMEM available.
[    0.060157]   mapped low ram: 0 - 363fe000
[    0.060158]   low ram: 0 - 363fe000
[    0.060178] Zone ranges:
[    0.060180]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.060184]   Normal   [mem 0x0000000001000000-0x00000000363fdfff]
[    0.060186]   HighMem  [mem 0x00000000363fe000-0x000000005be8ffff]
[    0.060189] Movable zone start for each node
[    0.060190] Early memory node ranges
[    0.060193]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.060195]   node   0: [mem 0x0000000000100000-0x000000005be8ffff]
[    0.060199] Initmem setup node 0 [mem 0x0000000000001000-0x000000005be8ffff]
[    0.060203] On node 0 totalpages: 376364
[    0.076276]   DMA zone: 40 pages used for memmap
[    0.076279]   DMA zone: 0 pages reserved
[    0.076282]   DMA zone: 3996 pages, LIFO batch:0
[    0.076611]   Normal zone: 2130 pages used for memmap
[    0.076613]   Normal zone: 218110 pages, LIFO batch:63
[    0.094004]   HighMem zone: 154258 pages, LIFO batch:31
[    0.106289] Using APIC driver default
[    0.106428] ACPI: PM-Timer IO Port: 0x4008
[    0.106433] ACPI: Local APIC address 0xfee00000
[    0.106449] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.106486] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[    0.106491] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 5 low level)
[    0.106498] ACPI: IRQ9 used by override.
[    0.106500] ACPI: IRQ10 used by override.
[    0.106504] Using ACPI (MADT) for SMP configuration information
[    0.106512] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.106542] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.106545] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.106547] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.106549] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.106551] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.106557] [mem 0x60000000-0xfebfffff] available for PCI devices
[    0.106559] Booting paravirtualized kernel on bare hardware
[    0.106570] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.106589] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.106896] percpu: Embedded 36 pages/cpu s116428 r0 d31028 u147456
[    0.106907] pcpu-alloc: s116428 r0 d31028 u147456 alloc=36*4096
[    0.106910] pcpu-alloc: [0] 0 
[    0.106949] Built 1 zonelists, mobility grouping on.  Total pages: 374194
[    0.106952] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d4948ffe-a401-44bc-8bbb-ccf2d76b1e68 rw loglevel=3 quiet
[    0.107613] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.107869] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.107929] mem auto-init: stack:byref_all, heap alloc:on, heap free:off
[    0.107944] Initializing HighMem for node 0 (000363fe:0005be90)
[    0.192017] Initializing Movable for node 0 (00000000:00000000)
[    0.211083] Memory: 1465420K/1505456K available (9003K kernel code, 840K rwdata, 3936K rodata, 860K init, 504K bss, 40036K reserved, 0K cma-reserved, 617032K highmem)
[    0.211086] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.211126] random: get_random_u32 called from __kmem_cache_create+0x26/0x4f0 with crng_init=0
[    0.211615] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.211649] ftrace: allocating 36272 entries in 71 pages
[    0.266717] ftrace: allocated 71 pages with 4 groups
[    0.267201] rcu: Preemptible hierarchical RCU implementation.
[    0.267204] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.267207] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.
[    0.267209] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.267212] 	Trampoline variant of Tasks RCU enabled.
[    0.267213] 	Rude variant of Tasks RCU enabled.
[    0.267215] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.267217] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.284454] NR_IRQS: 4352, nr_irqs: 256, preallocated irqs: 16
[    0.284964] Console: colour dummy device 80x25
[    0.284976] printk: console [tty0] enabled
[    0.284993] ACPI: Core revision 20200528
[    0.285166] APIC: Switch to symmetric I/O mode setup
[    0.285172] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.286469] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.376986] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.376987] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.376989] ..... (found apic 0 pin 0) ...
[    0.388484] ....... works.
[    0.388492] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x153f646f4ef, max_idle_ns: 440795212318 ns
[    0.388506] Calibrating delay loop (skipped), value calculated using timer frequency.. 2949.94 BogoMIPS (lpj=4913513)
[    0.388511] pid_max: default: 32768 minimum: 301
[    0.388610] LSM: Security Framework initializing
[    0.388619] Yama: becoming mindful.
[    0.388667] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.388678] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.389333] Disabled fast string operations
[    0.389391] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.389399] process: using mwait in idle threads
[    0.389413] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.389416] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
[    0.389423] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.389427] Spectre V2 : Mitigation: Full generic retpoline
[    0.389429] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.389431] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.389436] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.397474] Freeing SMP alternatives memory: 32K
[    0.516270] smpboot: CPU0: Intel(R) Celeron(R) M CPU        410  @ 1.46GHz (family: 0x6, model: 0xe, stepping: 0x8)
[    0.516517] mce: [Hardware Error]: Machine check events logged
[    0.516522] mce: [Hardware Error]: CPU 0: Machine Check: 0 Bank 0: b200000000000800
[    0.516536] mce: [Hardware Error]: TSC 0 
[    0.516544] mce: [Hardware Error]: PROCESSOR 0:6e8 TIME 1601064278 SOCKET 0 APIC 0 microcode 39
[    0.516722] Performance Events: Core events, core PMU driver.
[    0.516735] ... version:                1
[    0.516737] ... bit width:              40
[    0.516738] ... generic registers:      2
[    0.516740] ... value mask:             000000ffffffffff
[    0.516741] ... max period:             000000007fffffff
[    0.516743] ... fixed-purpose events:   0
[    0.516744] ... event mask:             0000000000000003
[    0.516853] rcu: Hierarchical SRCU implementation.
[    0.518363] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.518453] smp: Bringing up secondary CPUs ...
[    0.518457] smp: Brought up 1 node, 1 CPU
[    0.518459] smpboot: Max logical packages: 1
[    0.518462] smpboot: Total of 1 processors activated (2949.94 BogoMIPS)
[    0.518497] devtmpfs: initialized
[    0.519010] PM: Registering ACPI NVS region [mem 0x5bea1000-0x5befffff] (389120 bytes)
[    0.519346] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.519365] futex hash table entries: 256 (order: 2, 16384 bytes, linear)
[    0.519485] pinctrl core: initialized pinctrl subsystem
[    0.519730] PM: RTC time: 20:04:38, date: 2020-09-25
[    0.519746] thermal_sys: Registered thermal governor 'fair_share'
[    0.519748] thermal_sys: Registered thermal governor 'bang_bang'
[    0.519750] thermal_sys: Registered thermal governor 'step_wise'
[    0.519751] thermal_sys: Registered thermal governor 'user_space'
[    0.519753] thermal_sys: Registered thermal governor 'power_allocator'
[    0.519975] NET: Registered protocol family 16
[    0.520606] audit: initializing netlink subsys (disabled)
[    0.521055] cpuidle: using governor ladder
[    0.521068] cpuidle: using governor menu
[    0.521216] ACPI: bus type PCI registered
[    0.521220] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.521627] PCI: BIOS BUG #81[000fddc0] found
[    0.521628] PCI: Using configuration type 1 for base access
[    0.525192] audit: type=2000 audit(1601064278.146:1): state=initialized audit_enabled=0 res=1
[    0.526033] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[    0.532663] fbcon: Taking over console
[    0.532695] ACPI: Added _OSI(Module Device)
[    0.532698] ACPI: Added _OSI(Processor Device)
[    0.532700] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.532703] ACPI: Added _OSI(Processor Aggregator Device)
[    0.532706] ACPI: Added _OSI(Linux-Dell-Video)
[    0.532708] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.532711] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.539997] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.745957] ACPI: Interpreter enabled
[    0.746022] ACPI: (supports S0 S3 S4 S5)
[    0.746026] ACPI: Using IOAPIC for interrupt routing
[    0.746149] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.746507] ACPI: Enabled 8 GPEs in block 00 to 0F
[    0.754921] ACPI: Power Resource [PFAN] (off)
[    0.755544] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.755559] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.755575] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.755687] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.755691] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.755695] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.755698] acpi PNP0A03:00: host bridge window [mem 0x60000000-0xfff7ffff window] (ignored)
[    0.755701] PCI: root bus 00: using default resources
[    0.755981] PCI host bridge to bus 0000:00
[    0.755985] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.755988] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.755992] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.756019] pci 0000:00:00.0: [1106:0314] type 00 class 0x060000
[    0.756042] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xefffffff pref]
[    0.756264] pci 0000:00:00.1: [1106:1314] type 00 class 0x060000
[    0.756444] pci 0000:00:00.2: [1106:2314] type 00 class 0x060000
[    0.756615] pci 0000:00:00.3: [1106:3208] type 00 class 0x060000
[    0.756845] pci 0000:00:00.4: [1106:4314] type 00 class 0x060000
[    0.757025] pci 0000:00:00.7: [1106:7314] type 00 class 0x060000
[    0.757253] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
[    0.757330] pci 0000:00:01.0: supports D1
[    0.757510] pci 0000:00:06.0: [14e4:4318] type 00 class 0x028000
[    0.757531] pci 0000:00:06.0: reg 0x10: [mem 0xf5200000-0xf5201fff]
[    0.757738] pci 0000:00:0c.0: [1524:1410] type 02 class 0x060700
[    0.757765] pci 0000:00:0c.0: reg 0x10: [mem 0x60000000-0x60000fff]
[    0.757805] pci 0000:00:0c.0: supports D1 D2
[    0.757809] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.757959] pci 0000:00:0f.0: [1106:3149] type 00 class 0x01018f
[    0.757986] pci 0000:00:0f.0: reg 0x10: [io  0x1430-0x1437]
[    0.757999] pci 0000:00:0f.0: reg 0x14: [io  0x1424-0x1427]
[    0.758011] pci 0000:00:0f.0: reg 0x18: [io  0x1428-0x142f]
[    0.758023] pci 0000:00:0f.0: reg 0x1c: [io  0x1420-0x1423]
[    0.758036] pci 0000:00:0f.0: reg 0x20: [io  0x1400-0x140f]
[    0.758048] pci 0000:00:0f.0: reg 0x24: [io  0x1000-0x10ff]
[    0.758227] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
[    0.758291] pci 0000:00:0f.1: reg 0x20: [io  0x1410-0x141f]
[    0.758316] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.758319] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.758322] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.758325] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.758563] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
[    0.758623] pci 0000:00:10.0: reg 0x20: [io  0x1440-0x145f]
[    0.758681] pci 0000:00:10.0: supports D1 D2
[    0.758684] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.758829] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
[    0.758889] pci 0000:00:10.1: reg 0x20: [io  0x1460-0x147f]
[    0.758947] pci 0000:00:10.1: supports D1 D2
[    0.758950] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.759101] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
[    0.759126] pci 0000:00:10.4: reg 0x10: [mem 0xf5202000-0xf52020ff]
[    0.759219] pci 0000:00:10.4: supports D1 D2
[    0.759222] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.759370] pci 0000:00:11.0: [1106:3227] type 00 class 0x060100
[    0.759457] HPET not enabled in BIOS. You might try hpet=force boot option
[    0.759681] pci 0000:00:11.5: [1106:3059] type 00 class 0x040100
[    0.759705] pci 0000:00:11.5: reg 0x10: [io  0x1800-0x18ff]
[    0.759785] pci 0000:00:11.5: supports D1 D2
[    0.759978] pci 0000:00:11.6: [1106:3068] type 00 class 0x078000
[    0.760002] pci 0000:00:11.6: reg 0x10: [io  0x1c00-0x1cff]
[    0.760280] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
[    0.760305] pci 0000:00:12.0: reg 0x10: [io  0x2000-0x20ff]
[    0.760318] pci 0000:00:12.0: reg 0x14: [mem 0xf5202400-0xf52024ff]
[    0.760403] pci 0000:00:12.0: supports D1 D2
[    0.760406] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.760640] pci_bus 0000:01: extended config space not accessible
[    0.760725] pci 0000:01:00.0: [1106:3344] type 00 class 0x030000
[    0.760744] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff pref]
[    0.760754] pci 0000:01:00.0: reg 0x14: [mem 0xf4000000-0xf4ffffff]
[    0.760793] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.760835] pci 0000:01:00.0: supports D1 D2
[    0.760999] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.761008] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf4ffffff]
[    0.761014] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.761055] pci_bus 0000:02: extended config space not accessible
[    0.761091] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
[    0.761098] pci_bus 0000:00: on NUMA node 0
[    0.761369] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    0.761550] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[    0.761727] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *7, disabled.
[    0.761920] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *0, disabled.
[    0.762156] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 12) *9
[    0.762384] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *10 12)
[    0.762599] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 12) *7
[    0.762779] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 12) *0, disabled.
[    0.762959] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 12) *0, disabled.
[    0.763139] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 12) *0, disabled.
[    0.763319] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 12) *0, disabled.
[    0.763552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 12) *8
[    0.765424] iommu: Default domain type: Translated 
[    0.765531] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.765535] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.765538] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.765540] vgaarb: loaded
[    0.766060] SCSI subsystem initialized
[    0.766197] libata version 3.00 loaded.
[    0.766212] ACPI: bus type USB registered
[    0.766256] usbcore: registered new interface driver usbfs
[    0.766281] usbcore: registered new interface driver hub
[    0.766311] usbcore: registered new device driver usb
[    0.766354] pps_core: LinuxPPS API ver. 1 registered
[    0.766356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.766362] PTP clock support registered
[    0.766392] EDAC MC: Ver: 3.0.0
[    0.767017] NetLabel: Initializing
[    0.767020] NetLabel:  domain hash size = 128
[    0.767021] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.767053] NetLabel:  unlabeled traffic allowed by default
[    0.767055] PCI: Using ACPI for IRQ routing
[    0.767060] PCI: pci_cache_line_size set to 64 bytes
[    0.767134] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.767138] e820: reserve RAM buffer [mem 0x5be90000-0x5bffffff]
[    0.767476] clocksource: Switched to clocksource tsc-early
[    0.809441] VFS: Disk quotas dquot_6.6.0
[    0.809496] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.809722] pnp: PnP ACPI init
[    0.810585] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.810826] system 00:01: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.810831] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.810836] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.810840] system 00:01: [mem 0xfff80000-0xffffffff] could not be reserved
[    0.810844] system 00:01: [mem 0xff380000-0xff3fffff] has been reserved
[    0.810848] system 00:01: [mem 0xff780000-0xff7fffff] has been reserved
[    0.810851] system 00:01: [mem 0xffb80000-0xffbfffff] has been reserved
[    0.810865] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.811185] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.811189] system 00:02: [io  0xfe10-0xfe11] has been reserved
[    0.811193] system 00:02: [io  0xfe00] has been reserved
[    0.811196] system 00:02: [io  0x4000-0x407f] has been reserved
[    0.811200] system 00:02: [io  0x4100-0x411f] has been reserved
[    0.811210] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.811300] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.811380] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.812314] pnp: PnP ACPI: found 5 devices
[    0.850905] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.851079] NET: Registered protocol family 2
[    0.851600] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.851640] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.851732] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
[    0.851785] TCP: Hash tables configured (established 8192 bind 8192)
[    0.852043] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.852071] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.852177] NET: Registered protocol family 1
[    0.852236] pci 0000:00:0c.0: BAR 15: assigned [mem 0x64000000-0x67ffffff pref]
[    0.852241] pci 0000:00:0c.0: BAR 16: assigned [mem 0x68000000-0x6bffffff]
[    0.852247] pci 0000:00:0c.0: BAR 13: assigned [io  0x2400-0x24ff]
[    0.852252] pci 0000:00:0c.0: BAR 14: assigned [io  0x2800-0x28ff]
[    0.852262] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00010000 pref]
[    0.852265] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00010000 pref]
[    0.852270] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.852277] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf4ffffff]
[    0.852283] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf3ffffff pref]
[    0.852291] pci 0000:00:0c.0: CardBus bridge to [bus 02-05]
[    0.852294] pci 0000:00:0c.0:   bridge window [io  0x2400-0x24ff]
[    0.852299] pci 0000:00:0c.0:   bridge window [io  0x2800-0x28ff]
[    0.852305] pci 0000:00:0c.0:   bridge window [mem 0x64000000-0x67ffffff pref]
[    0.852311] pci 0000:00:0c.0:   bridge window [mem 0x68000000-0x6bffffff]
[    0.852319] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.852322] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.852326] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf4ffffff]
[    0.852329] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[    0.852332] pci_bus 0000:02: resource 0 [io  0x2400-0x24ff]
[    0.852335] pci_bus 0000:02: resource 1 [io  0x2800-0x28ff]
[    0.852339] pci_bus 0000:02: resource 2 [mem 0x64000000-0x67ffffff pref]
[    0.852342] pci_bus 0000:02: resource 3 [mem 0x68000000-0x6bffffff]
[    0.852476] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.852781] ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug
[    0.852899] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21
[    0.852902] PCI Interrupt Link [ALKD] enabled at IRQ 21
[    0.853091] pci 0000:00:10.0: CLS mismatch (64 != 32), using 64 bytes
[    0.853584] pci 0000:00:11.0: Bypassing VIA 8237 APIC De-Assert Message
[    0.853607] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.853752] Trying to unpack rootfs image as initramfs...
[    1.209823] Freeing initrd memory: 8676K
[    1.210122] apm: BIOS not found.
[    1.210263] check: Scanning for low memory corruption every 60 seconds
[    1.211334] Initialise system trusted keyrings
[    1.211360] Key type blacklist registered
[    1.211517] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.215381] zbud: loaded
[    1.246341] Key type asymmetric registered
[    1.246344] Asymmetric key parser 'x509' registered
[    1.246680] bounce: pool size: 64 pages
[    1.246757] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.246892] io scheduler mq-deadline registered
[    1.246895] io scheduler kyber registered
[    1.247026] io scheduler bfq registered
[    1.247898] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    1.247902] vesafb: scrolling: redraw
[    1.247906] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    1.247927] vesafb: framebuffer at 0xf0000000, mapped to 0x(ptrval), using 1216k, total 1216k
[    1.248230] Console: switching to colour frame buffer device 80x30
[    1.262295] fb0: VESA VGA frame buffer device
[    1.262342] intel_idle: MWAIT substates: 0x1110
[    1.262495] ACPI: \_PR_.CPU0: Found 2 idle states
[    1.262498] intel_idle: ACPI _CST not found or not usable
[    1.262628] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.262689] ACPI: Power Button [PWRB]
[    1.262777] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.266241] ACPI: Lid Switch [LID]
[    1.266368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.266440] ACPI: Power Button [PWRF]
[    1.266718] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.266955] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:0b/LNXVIDEO:00/input/input3
[    1.267087] ACPI: \_PR_.CPU0: Found 2 idle states
[    1.267091] tsc: Marking TSC unstable due to TSC halts in idle
[    1.267509] clocksource: Switched to clocksource acpi_pm
[    1.274608] thermal LNXTHERM:00: registered as thermal_zone0
[    1.274611] ACPI: Thermal Zone [THRM] (52 C)
[    1.274801] isapnp: Scanning for PnP cards...
[    1.587985] isapnp: No Plug & Play device found
[    1.588221] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.590218] usbcore: registered new interface driver usbserial_generic
[    1.590230] usbserial: USB Serial support registered for generic
[    1.590267] rtc_cmos 00:00: RTC can wake from S4
[    1.590702] rtc_cmos 00:00: registered as rtc0
[    1.590747] rtc_cmos 00:00: setting system clock to 2020-09-25T20:04:39 UTC (1601064279)
[    1.590794] rtc_cmos 00:00: alarms up to one year, y3k, 242 bytes nvram
[    1.590930] intel_pstate: CPU model not supported
[    1.590968] ledtrig-cpu: registered to indicate activity on CPUs
[    1.591075] drop_monitor: Initializing network drop monitor service
[    1.591552] NET: Registered protocol family 10
[    1.604447] Segment Routing with IPv6
[    1.604451] RPL Segment Routing with IPv6
[    1.604527] NET: Registered protocol family 17
[    1.605014] microcode: sig=0x6e8, pf=0x20, revision=0x39
[    1.605113] microcode: Microcode Update Driver: v2.2.
[    1.605123] IPI shorthand broadcast: enabled
[    1.605320] registered taskstats version 1
[    1.605341] Loading compiled-in X.509 certificates
[    1.618823] Loaded X.509 cert 'Build time autogenerated kernel key: 34c3515acfd1f0aa2680aaf572841965c48d730f'
[    1.619057] zswap: loaded using pool lz4/z3fold
[    1.619345] Key type ._fscrypt registered
[    1.619347] Key type .fscrypt registered
[    1.619349] Key type fscrypt-provisioning registered
[    1.619959] PM:   Magic number: 4:533:94
[    1.620287] RAS: Correctable Errors collector initialized.
[    1.620306] Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
[    1.622866] Freeing unused kernel image (initmem) memory: 860K
[    1.631961] Write protecting kernel text and read-only data: 12940k
[    1.631973] Run /init as init process
[    1.631977]   with arguments:
[    1.631978]     /init
[    1.631980]   with environment:
[    1.631982]     HOME=/
[    1.631983]     TERM=linux
[    1.631985]     BOOT_IMAGE=/boot/vmlinuz-linux
[    2.067525] sata_via 0000:00:0f.0: version 2.6
[    2.067785] sata_via 0000:00:0f.0: routed to hard irq line 10
[    2.068388] pata_via 0000:00:0f.1: version 0.3.4
[    2.070636] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.075244] scsi host0: sata_via
[    2.078700] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.079874] i8042: Detected active multiplexing controller, rev 1.1
[    2.080427] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.085069] scsi host2: sata_via
[    2.085279] ata1: SATA max UDMA/133 cmd 0x1430 ctl 0x1424 bmdma 0x1400 irq 20
[    2.085283] ata2: SATA max UDMA/133 cmd 0x1428 ctl 0x1420 bmdma 0x1408 irq 20
[    2.088642] scsi host1: pata_via
[    2.089966] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.090067] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.090146] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.090218] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.095237] scsi host3: pata_via
[    2.095383] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1410 irq 14
[    2.095386] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1418 irq 15
[    2.112502] ehci-pci: EHCI PCI platform driver
[    2.112819] ehci-pci 0000:00:10.4: EHCI Host Controller
[    2.112832] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.112941] ehci-pci 0000:00:10.4: irq 21, io mem 0xf5202000
[    2.125273] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.125420] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[    2.125423] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.125427] usb usb1: Product: EHCI Host Controller
[    2.125430] usb usb1: Manufacturer: Linux 5.8.10-arch1-1.1 ehci_hcd
[    2.125433] usb usb1: SerialNumber: 0000:00:10.4
[    2.125735] hub 1-0:1.0: USB hub found
[    2.125756] hub 1-0:1.0: 4 ports detected
[    2.174748] uhci_hcd: USB Universal Host Controller Interface driver
[    2.175043] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.175057] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.175071] uhci_hcd 0000:00:10.0: detected 2 ports
[    2.175099] uhci_hcd 0000:00:10.0: irq 21, io base 0x00001440
[    2.181944] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[    2.181949] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.181953] usb usb2: Product: UHCI Host Controller
[    2.181956] usb usb2: Manufacturer: Linux 5.8.10-arch1-1.1 uhci_hcd
[    2.181959] usb usb2: SerialNumber: 0000:00:10.0
[    2.183079] hub 2-0:1.0: USB hub found
[    2.183101] hub 2-0:1.0: 2 ports detected
[    2.188729] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.188744] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.188756] uhci_hcd 0000:00:10.1: detected 2 ports
[    2.188783] uhci_hcd 0000:00:10.1: irq 21, io base 0x00001460
[    2.188932] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.08
[    2.188936] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.188939] usb usb3: Product: UHCI Host Controller
[    2.188942] usb usb3: Manufacturer: Linux 5.8.10-arch1-1.1 uhci_hcd
[    2.188945] usb usb3: SerialNumber: 0000:00:10.1
[    2.195346] hub 3-0:1.0: USB hub found
[    2.195367] hub 3-0:1.0: 2 ports detected
[    2.291858] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.306544] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    2.451173] ata1.00: ATA-7: FUJITSU MHV2060BH, 00000029, max UDMA/100
[    2.451179] ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.474724] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060B 0029 PQ: 0 ANSI: 5
[    2.475459] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.9 GiB)
[    2.475493] sd 0:0:0:0: [sda] Write Protect is off
[    2.475497] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.475553] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.574906]  sda: sda1 sda2
[    2.575821] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.658518] random: fast init done
[    2.681869] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    2.878903] ata4.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[    2.907859] scsi 3:0:0:0: CD-ROM            HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[    3.078434] sr 3:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[    3.078439] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.096440] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.857562] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.669697] random: crng init done
[    6.910414] systemd[1]: systemd 245.6-8.0-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.925266] systemd[1]: Detected architecture x86.
[    6.957700] systemd[1]: Set hostname to <oldtop>.
[    7.012707] BPF:hdr_len not found
[    8.724133] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[    8.724144] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[    8.726069] systemd[1]: Created slice system-getty.slice.
[    8.726795] systemd[1]: Created slice system-modprobe.slice.
[    8.727362] systemd[1]: Created slice User and Session Slice.
[    8.727539] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.727665] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.728109] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.728205] systemd[1]: Reached target Local Encrypted Volumes.
[    8.728286] systemd[1]: Reached target Paths.
[    8.728336] systemd[1]: Reached target Remote File Systems.
[    8.728374] systemd[1]: Reached target Slices.
[    8.728758] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    8.734496] systemd[1]: Listening on Process Core Dump Socket.
[    8.734667] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    8.735128] systemd[1]: Listening on Journal Audit Socket.
[    8.735442] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.735709] systemd[1]: Listening on Journal Socket.
[    8.736003] systemd[1]: Listening on udev Control Socket.
[    8.736181] systemd[1]: Listening on udev Kernel Socket.
[    8.739230] systemd[1]: Mounting Huge Pages File System...
[    8.743446] systemd[1]: Mounting POSIX Message Queue File System...
[    8.748931] systemd[1]: Mounting Kernel Debug File System...
[    8.755686] systemd[1]: Mounting Kernel Trace File System...
[    8.760213] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    8.767725] systemd[1]: Starting Load Kernel Module drm...
[    8.885687] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    8.885978] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[    8.889851] systemd[1]: Starting Journal Service...
[    8.906245] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
[    8.906578] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[    8.909209] systemd[1]: Mounting Kernel Configuration File System...
[    8.920365] systemd[1]: Starting Remount Root and Kernel File Systems...
[    8.933740] Linux agpgart interface v0.103
[    8.942534] systemd[1]: Starting Apply Kernel Variables...
[    8.959373] systemd[1]: Starting udev Coldplug all Devices...
[    8.970476] systemd[1]: Mounted Huge Pages File System.
[    8.975684] systemd[1]: Mounted POSIX Message Queue File System.
[    8.976052] systemd[1]: Mounted Kernel Debug File System.
[    8.976374] systemd[1]: Mounted Kernel Trace File System.
[    8.982221] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    8.982942] systemd[1]: Mounted Kernel Configuration File System.
[    8.992574] EXT4-fs (sda2): re-mounted. Opts: (null)
[    8.997956] systemd[1]: Finished Remount Root and Kernel File Systems.
[    8.998366] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[    9.122025] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    9.124594] systemd[1]: Starting Load/Save Random Seed...
[    9.124715] systemd[1]: Condition check resulted in Create System Users being skipped.
[    9.136439] systemd[1]: Starting Create Static Device Nodes in /dev...
[    9.193299] systemd[1]: Finished Apply Kernel Variables.
[    9.319548] systemd[1]: modprobe@drm.service: Succeeded.
[    9.320523] systemd[1]: Finished Load Kernel Module drm.
[    9.493488] systemd[1]: Finished udev Coldplug all Devices.
[    9.493602] audit: type=1130 audit(1601064287.400:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.587391] systemd[1]: Started Journal Service.
[    9.588593] audit: type=1130 audit(1601064287.493:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.603136] audit: type=1130 audit(1601064287.510:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    9.704332] systemd-journald[179]: Received client request to flush runtime journal.
[    9.759165] audit: type=1130 audit(1601064287.666:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.129461] audit: type=1130 audit(1601064289.036:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.856700] audit: type=1130 audit(1601064289.763:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   12.213756] agpgart: Detected VIA VT3314 chipset
[   12.267655] agpgart-via 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[   12.376944] battery: ACPI: Battery Slot [BAT0] (battery present)
[   12.427638] ACPI: AC Adapter [ACAD] (on-line)
[   12.449065] yenta_cardbus 0000:00:0c.0: CardBus bridge found [1734:10ca]
[   12.449089] yenta_cardbus 0000:00:0c.0: Using CSCINT to route CSC interrupts to PCI
[   12.449092] yenta_cardbus 0000:00:0c.0: Routing CardBus interrupts to PCI
[   12.449098] yenta_cardbus 0000:00:0c.0: TI: mfunc 0x01021002, devctl 0x44
[   12.676743] b43-pci-bridge 0000:00:06.0: enabling device (0004 -> 0006)
[   12.689412] yenta_cardbus 0000:00:0c.0: ISA IRQ mask 0x0a98, PCI irq 17
[   12.689418] yenta_cardbus 0000:00:0c.0: Socket status: 30000006
[   12.698611] ssb: Found chip with id 0x4318, rev 0x02 and package 0x00
[   12.745558] b43-pci-bridge 0000:00:06.0: Sonics Silicon Backplane found on PCI device 0000:00:06.0
[   13.213707] via_rhine: v1.10-LK1.5.1 2010-10-09 Written by Donald Becker
[   13.282326] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 2375f4c0, 00:40:ca:e1:14:aa, IRQ 23
[   13.283111] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1
[   13.547743] input: PC Speaker as /devices/platform/pcspkr/input/input13
[   13.906215] intel_powerclamp: No package C-state available
[   13.938647] Adding 1048572k swap on /dev/sda1.  Priority:-2 extents:1 across:1048572k FS
[   14.311114] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input12
[   14.404834] mousedev: PS/2 mouse device common for all mice
[   14.641580] snd_via82xx_modem 0000:00:11.6: enabling device (0000 -> 0001)
[   14.643407] ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug
[   14.643519] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[   14.643522] PCI Interrupt Link [ALKC] enabled at IRQ 22
[   14.665799] audit: type=1130 audit(1601064292.573:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.776277] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
[   14.806406] audit: type=1127 audit(1601064292.713:9): pid=221 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   14.847199] snd_via82xx 0000:00:11.5: enabling device (0000 -> 0001)
[   14.887053] audit: type=1130 audit(1601064292.793:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   14.991333] audit: type=1130 audit(1601064292.896:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   15.601914] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   15.747080] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   15.747210] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   15.747213] cfg80211: failed to load regulatory.db
[   16.569600] audit: type=1130 audit(1601064294.473:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   16.764511] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[   16.801864] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[   16.801886] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2050, Revision 8, Version 0
[   16.815373] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   16.815422] b43 ssb0:0: Direct firmware load for b43/ucode5.fw failed with error -2
[   16.815487] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   16.815530] b43 ssb0:0: Direct firmware load for b43-open/ucode5.fw failed with error -2
[   16.815536] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[   16.815538] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[   16.815541] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[   16.817146] Broadcom 43xx driver loaded [ Features: PNLS ]
[   17.038580] audit: type=1130 audit(1601064294.943:13): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.082941] audit: type=1130 audit(1601064294.990:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.093229] audit: type=1130 audit(1601064295.000:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=getty@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   17.408593] audit: type=1130 audit(1601064295.313:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   18.185679] audit: type=1130 audit(1601064296.093:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   28.171261] audit: type=1131 audit(1601064306.077:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.336698] audit: type=1100 audit(1601064317.243:19): pid=237 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="user" exe="/usr/bin/login" hostname=oldtop addr=? terminal=tty1 res=success'
[   39.345405] audit: type=1101 audit(1601064317.253:20): pid=237 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="user" exe="/usr/bin/login" hostname=oldtop addr=? terminal=tty1 res=success'
[   39.390399] audit: type=1103 audit(1601064317.297:21): pid=237 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_securetty,pam_shells,pam_faillock,pam_permit,pam_faillock acct="user" exe="/usr/bin/login" hostname=oldtop addr=? terminal=tty1 res=success'
[   39.391159] audit: type=1006 audit(1601064317.297:22): pid=237 uid=0 old-auid=4294967295 auid=1000 tty=tty1 old-ses=4294967295 ses=1 res=1
[   39.538246] audit: type=1130 audit(1601064317.443:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.590657] audit: type=1101 audit(1601064317.497:24): pid=250 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="user" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.591536] audit: type=1103 audit(1601064317.497:25): pid=250 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="user" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[   39.592647] audit: type=1006 audit(1601064317.500:26): pid=250 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   39.595733] audit: type=1105 audit(1601064317.503:27): pid=250 uid=0 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_loginuid,pam_loginuid,pam_keyinit,pam_limits,pam_unix,pam_permit,pam_mail,pam_systemd,pam_env acct="user" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.068094] audit: type=1130 audit(1601064317.973:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   47.474393] kauditd_printk_skb: 2 callbacks suppressed
[   47.474398] audit: type=1131 audit(1601064325.380:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   80.100024] audit: type=1100 audit(1601064358.004:32): pid=294 uid=1000 auid=1000 ses=1 msg='op=PAM:authentication grantors=pam_faillock,pam_permit,pam_faillock acct="user" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[   80.106728] audit: type=1101 audit(1601064358.011:33): pid=294 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="user" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[   80.109176] audit: type=1110 audit(1601064358.014:34): pid=294 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[   80.109597] audit: type=1105 audit(1601064358.014:35): pid=294 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[   80.221007] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   80.221015] [drm] Initialized via 2.11.1 20070202 for 0000:01:00.0 on minor 0
[   80.226380] audit: type=1106 audit(1601064358.131:36): pid=294 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[   80.227000] audit: type=1104 audit(1601064358.131:37): pid=294 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[  125.512491] audit: type=1101 audit(1601064403.418:38): pid=298 uid=1000 auid=1000 ses=1 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="user" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[  125.513568] audit: type=1110 audit(1601064403.418:39): pid=298 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[  125.515590] audit: type=1105 audit(1601064403.421:40): pid=298 uid=0 auid=1000 ses=1 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[  125.523335] audit: type=1106 audit(1601064403.428:41): pid=298 uid=0 auid=1000 ses=1 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'
[  125.523931] audit: type=1104 audit(1601064403.428:42): pid=298 uid=0 auid=1000 ses=1 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=oldtop addr=? terminal=/dev/tty1 res=success'

In lsmod I can see :
drm 475136 0

also the full output :

Module                  Size  Used by
b43                   397312  0
cordic                 16384  1 b43
bcma                   53248  1 b43
mac80211              782336  1 b43
cfg80211              688128  2 b43,mac80211
rfkill                 24576  2 cfg80211
libarc4                16384  1 mac80211
rng_core               16384  1 b43
joydev                 24576  0
snd_via82xx_modem      24576  0
snd_via82xx            32768  0
mousedev               20480  0
snd_mpu401_uart        16384  1 snd_via82xx
gameport               20480  1 snd_via82xx
snd_ac97_codec        126976  2 snd_via82xx_modem,snd_via82xx
snd_rawmidi            32768  1 snd_mpu401_uart
snd_seq_device         16384  1 snd_rawmidi
ac97_bus               16384  1 snd_ac97_codec
snd_pcm               114688  3 snd_via82xx_modem,snd_via82xx,snd_ac97_codec
coretemp               20480  0
snd_timer              36864  1 snd_pcm
snd                    77824  8 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm
psmouse               151552  0
pcspkr                 16384  0
input_leds             16384  0
soundcore              16384  1 snd
via_rhine              32768  0
i2c_viapro             20480  0
mii                    16384  1 via_rhine
ssb                    73728  1 b43
evdev                  20480  4
mmc_core              143360  2 b43,ssb
mac_hid                16384  0
ac                     16384  0
battery                20480  0
yenta_socket           36864  0
pcmcia                 57344  1 ssb
via_agp                16384  1
pcmcia_rsrc            24576  1 yenta_socket
pcmcia_core            28672  3 yenta_socket,pcmcia,pcmcia_rsrc
drm                   475136  0
agpgart                40960  2 via_agp,drm
ip_tables              24576  0
x_tables               36864  1 ip_tables
ext4                  622592  1
crc32c_generic         16384  2
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  110592  1 ext4
sr_mod                 24576  0
cdrom                  61440  1 sr_mod
ata_generic            16384  0
pata_acpi              16384  0
serio_raw              20480  0
atkbd                  28672  0
libps2                 20480  2 atkbd,psmouse
uhci_hcd               45056  0
ehci_pci               20480  0
i8042                  28672  0
ehci_hcd               73728  1 ehci_pci
pata_via               16384  0
sata_via               20480  2
serio                  24576  9 serio_raw,atkbd,psmouse,i8042

however after I load the module by hand this appears in lsmod:
drm 475136 2 via
full output:

Module                  Size  Used by
via                    40960  0
b43                   397312  0
cordic                 16384  1 b43
bcma                   53248  1 b43
mac80211              782336  1 b43
cfg80211              688128  2 b43,mac80211
rfkill                 24576  2 cfg80211
libarc4                16384  1 mac80211
rng_core               16384  1 b43
joydev                 24576  0
snd_via82xx_modem      24576  0
snd_via82xx            32768  0
mousedev               20480  0
snd_mpu401_uart        16384  1 snd_via82xx
gameport               20480  1 snd_via82xx
snd_ac97_codec        126976  2 snd_via82xx_modem,snd_via82xx
snd_rawmidi            32768  1 snd_mpu401_uart
snd_seq_device         16384  1 snd_rawmidi
ac97_bus               16384  1 snd_ac97_codec
snd_pcm               114688  3 snd_via82xx_modem,snd_via82xx,snd_ac97_codec
coretemp               20480  0
snd_timer              36864  1 snd_pcm
snd                    77824  8 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm
psmouse               151552  0
pcspkr                 16384  0
input_leds             16384  0
soundcore              16384  1 snd
via_rhine              32768  0
i2c_viapro             20480  0
mii                    16384  1 via_rhine
ssb                    73728  1 b43
evdev                  20480  4
mmc_core              143360  2 b43,ssb
mac_hid                16384  0
ac                     16384  0
battery                20480  0
yenta_socket           36864  0
pcmcia                 57344  1 ssb
via_agp                16384  1
pcmcia_rsrc            24576  1 yenta_socket
pcmcia_core            28672  3 yenta_socket,pcmcia,pcmcia_rsrc
drm                   475136  2 via
agpgart                40960  2 via_agp,drm
ip_tables              24576  0
x_tables               36864  1 ip_tables
ext4                  622592  1
crc32c_generic         16384  2
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  110592  1 ext4
sr_mod                 24576  0
cdrom                  61440  1 sr_mod
ata_generic            16384  0
pata_acpi              16384  0
serio_raw              20480  0
atkbd                  28672  0
libps2                 20480  2 atkbd,psmouse
uhci_hcd               45056  0
ehci_pci               20480  0
i8042                  28672  0
ehci_hcd               73728  1 ehci_pci
pata_via               16384  0
sata_via               20480  2
serio                  24576  9 serio_raw,atkbd,psmouse,i8042

The error I get from trying startx is pretty much the same:

[   303.613] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   303.619] 
X.Org X Server 1.20.9
X Protocol Version 11, Revision 0
[   303.638] Build Operating System: Linux Arch Linux
[   303.651] Current Operating System: Linux oldtop 5.8.10-arch1-1.1 #1 SMP PREEMPT Fri, 25 Sep 2020 08:48:44 +0000 i686
[   303.652] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d4948ffe-a401-44bc-8bbb-ccf2d76b1e68 rw loglevel=3 quiet
[   303.674] Build Date: 02 September 2020  02:44:38PM
[   303.681]  
[   303.689] Current version of pixman: 0.40.0
[   303.705] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   303.705] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   303.739] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 25 23:41:31 2020
[   303.748] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   303.756] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   303.757] (==) No Layout section.  Using the first Screen section.
[   303.757] (==) No screen section available. Using defaults.
[   303.757] (**) |-->Screen "Default Screen Section" (0)
[   303.757] (**) |   |-->Monitor "<default monitor>"
[   303.757] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   303.757] (**) |   |-->Device ""
[   303.757] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   303.757] (==) Automatically adding devices
[   303.757] (==) Automatically enabling devices
[   303.757] (==) Automatically adding GPU devices
[   303.757] (==) Automatically binding GPU devices
[   303.758] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   303.758] (WW) The directory "/usr/share/fonts/misc" does not exist.
[   303.758] 	Entry deleted from font path.
[   303.758] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[   303.758] 	Entry deleted from font path.
[   303.758] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   303.758] 	Entry deleted from font path.
[   303.758] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   303.758] 	Entry deleted from font path.
[   303.758] (==) FontPath set to:
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   303.758] (==) ModulePath set to "/usr/lib/xorg/modules"
[   303.758] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   303.758] (II) Module ABI versions:
[   303.758] 	X.Org ANSI C Emulation: 0.4
[   303.758] 	X.Org Video Driver: 24.1
[   303.758] 	X.Org XInput driver : 24.1
[   303.758] 	X.Org Server Extension : 10.0
[   303.759] (++) using VT number 1

[   303.764] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   303.765] (II) xfree86: Adding drm device (/dev/dri/card0)
[   303.765] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[   303.768] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   303.774] (--) PCI:*(1@0:0:0) 1106:3344:1734:10ca rev 1, Mem @ 0xf0000000/67108864, 0xf4000000/16777216, BIOS @ 0x????????/131072
[   303.774] (II) LoadModule: "glx"
[   303.775] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   303.778] (II) Module glx: vendor="X.Org Foundation"
[   303.778] 	compiled for 1.20.9, module version = 1.0.0
[   303.778] 	ABI class: X.Org Server Extension, version 10.0
[   303.778] (II) LoadModule: "openchrome"
[   303.779] (II) Loading /usr/lib/xorg/modules/drivers/openchrome_drv.so
[   303.779] (II) Module openchrome: vendor="https://www.freedesktop.org/wiki/Openchrome/"
[   303.779] 	compiled for 1.20.8, module version = 0.6.0
[   303.779] 	Module class: X.Org Video Driver
[   303.779] 	ABI class: X.Org Video Driver, version 24.1
[   303.779] (II) OPENCHROME: Driver for VIA Chrome chipsets: CLE266,
	KM400 / KM400A / KN400 / P4M800, K8M800 / K8N800,
	PM800 / PN800 / PM880 / CN333 / CN400, P4M800 Pro / VN800 / CN700,
	CX700 / VX700, P4M890 / VN890 / CN800, K8M890 / K8N890,
	P4M900 / VN896 / CN896, VX800 / VX820, VX855 / VX875, VX900
[   303.780] (!!) VIA Technologies does not support this driver in any way.
[   303.780] (!!) For support, please refer to https://www.freedesktop.org/wiki/Openchrome/.
[   303.780] (!!) (openchrome 0.6.0 release)
[   303.780] (II) CHROME(0): viaPreInit
[   303.780] (II) CHROME(0): VIAGetRec
[   303.780] (--) CHROME(0): Chipset: P4M800 Pro / VN800 / CN700
[   303.780] (--) CHROME(0): Chipset revision: 0
[   303.781] (II) [drm] KMS not enabled
[   303.781] (II) CHROME(0): [drm] via interface version: 2.11.1
[   303.782] (II) CHROME(0): DRI 1 api supported
[   303.782] (II) Loading sub module "vgahw"
[   303.782] (II) LoadModule: "vgahw"
[   303.782] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   303.782] (II) Module vgahw: vendor="X.Org Foundation"
[   303.782] 	compiled for 1.20.9, module version = 0.1.0
[   303.782] 	ABI class: X.Org Video Driver, version 24.1
[   303.782] (--) CHROME(0): Probed amount of VideoRAM = 65536 kB
[   303.782] (II) CHROME(0): Entered viaMapMMIO.
[   303.782] (--) CHROME(0): Mapping MMIO at address 0xF4000000 with size 52 KB.
[   303.782] (--) CHROME(0): Mapping 2D Host BitBLT space at address 0xF4200000 with size 2048 KB.
[   303.782] (--) CHROME(0): Mapping the frame buffer at address 0xF0000000 with size 65536 KB.
[   303.782] (EE) CHROME(0): Unable to map the frame buffer.
Error: Invalid argument (22)
[   303.782] (II) CHROME(0): Exiting viaMapMMIO.
[   303.782] (II) CHROME(0): VIAFreeRec
[   303.782] (II) CHROME(0): VIAFreeScreen
[   303.783] (II) CHROME(0): VIAFreeRec
[   303.783] (II) UnloadModule: "openchrome"
[   303.783] (II) UnloadSubModule: "vgahw"
[   303.783] (II) Unloading vgahw
[   303.783] (EE) Screen(s) found, but none have a usable configuration.
[   303.783] (EE) 
Fatal server error:
[   303.783] (EE) no screens found(EE) 
[   303.783] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   303.783] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   303.783] (EE) 
[   303.800] (EE) Server terminated with error (1). Closing log file.

Also I opened the laptop and the graphics chip is VN800, which should be supported by the openchrome driver.


EDIT: Looking through the xorg errors (I compared the very first error I posted to the most recent) I noticed that instead of

Line 79: [   864.696] (EE) CHROME(0): [drm] Failed to open DRM device for pci:0000:01:00.0: No such file or directory	

it says :

Line 82: [   303.781] (II) [drm] KMS not enabled
Line 83: [   303.781] (II) CHROME(0): [drm] via interface version: 2.11.1
Line 84: [   303.782] (II) CHROME(0): DRI 1 api supported

Last edited by Raudonkepuris (2020-09-27 15:59:26)

Offline

#12 2020-09-28 15:29:35

abaumann
Administrator
From: Zurich
Registered: 2019-11-14
Posts: 360
Website

Re: Xorg problem on VIA S3G UniChrome Pro

Aha, so the VIA DRM module loads. :-)
But now check your kernel boot parameters:
- Do _NOT_ put nomodeset or vga=xxx in there
- Maybe force KMS by setting a boot parameter "via.modeset=1".

Offline

#13 2020-10-02 06:08:38

Raudonkepuris
Member
Registered: 2020-09-24
Posts: 6

Re: Xorg problem on VIA S3G UniChrome Pro

abaumann wrote:

- Maybe force KMS by setting a boot parameter "via.modeset=1".

Where should I put it (the "via.modeset=1")? I don't have neither "vga=xxx" nor "nomodeset" in my kernel boot parameters.

EDIT: I've tried to change settings from grub by pressing "e", no luck, the same error. If you could be more specific I would really appreciate it, I've never done this before.

Last edited by Raudonkepuris (2020-10-02 06:30:27)

Offline

#14 2020-10-02 07:34:16

levi
Moderator
From: Yorkshire, UK
Registered: 2018-06-16
Posts: 952

Re: Xorg problem on VIA S3G UniChrome Pro

Kernel boot parameters are indeed accessed by editing your kernel calling line which I recall is the 'e' key in grub.  Just adding it after a space to the kernel line you're editing should be enough, so if that did nothing then that's disappointing.


Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.

Offline

#15 2020-10-02 08:15:15

abaumann
Administrator
From: Zurich
Registered: 2019-11-14
Posts: 360
Website

Re: Xorg problem on VIA S3G UniChrome Pro

The kernel parameters are described here:

https://wiki.archlinux.org/index.php/ke … eters#GRUB

But acutally https://bbs.archlinux.org/viewtopic.php?id=240369 tells me the usual
story of the kernel dropping random stuff.

I would try first to get VESA working, at least you have some graphical output then.

Offline

Board footer

Powered by FluxBB