You are not logged in.

#1 2018-03-24 01:55:01

scorpion26
Member
Registered: 2018-03-16
Posts: 15

help with install?

ok so i have a dell dimension 4600i it has a single core p4 2.66ghz proc, 4gb of ram, a nvidia nv34 (geforce fx 5200) ethernet that works and wifi that works but having trouble getting "systemctl enable and start sddm" it throws a black screen with "-" blinking and stays there. i had mx 17.1 installed on this system and it worked just fine. the driver for mx-17.1 was nouveau. it unloaded nv, modsetting, fbdev, vesa. the res is 1360x768. please help i want arch and not mx-17.1

Offline

#2 2018-03-24 19:49:48

tyzoid
Administrator
From: Ann Arbor, MI
Registered: 2017-06-17
Posts: 86

Re: help with install?

Please do not double post.

We'll need some logs to determine what's going on. Can you post your Xorg.0.log, dmesg and syslog?

Offline

#3 2018-03-24 20:01:35

scorpion26
Member
Registered: 2018-03-16
Posts: 15

Re: help with install?

what is the command for those?

Offline

#4 2018-05-13 16:43:26

ARandomScientist
Member
Registered: 2018-05-13
Posts: 2

Re: help with install?

I am experiencing the same issue.

Here's my Xorg.0.log:

[   642.433] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[   642.433] X Protocol Version 11, Revision 0
[   642.433] Build Operating System: Linux 4.16.3-1-ARCH i686 
[   642.433] Current Operating System: Linux Susan-PC 4.16.6-1.0-ARCH #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018 i686
[   642.433] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b1099bb-fad0-45e9-9806-b2de458766d2 rw quiet
[   642.433] Build Date: 26 April 2018  02:40:49PM
[   642.433]  
[   642.433] Current version of pixman: 0.34.0
[   642.433] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   642.434] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   642.434] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May 13 10:53:05 2018
[   642.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   642.434] (==) No Layout section.  Using the first Screen section.
[   642.434] (==) No screen section available. Using defaults.
[   642.434] (**) |-->Screen "Default Screen Section" (0)
[   642.434] (**) |   |-->Monitor "<default monitor>"
[   642.435] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   642.435] (==) Automatically adding devices
[   642.435] (==) Automatically enabling devices
[   642.435] (==) Automatically adding GPU devices
[   642.435] (==) Automatically binding GPU devices
[   642.435] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   642.435] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[   642.435] 	Entry deleted from font path.
[   642.435] (==) FontPath set to:
	
[   642.435] (==) ModulePath set to "/usr/lib/xorg/modules"
[   642.435] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   642.435] (II) Loader magic: 0x6976c0
[   642.435] (II) Module ABI versions:
[   642.435] 	X.Org ANSI C Emulation: 0.4
[   642.435] 	X.Org Video Driver: 23.0
[   642.435] 	X.Org XInput driver : 24.1
[   642.435] 	X.Org Server Extension : 10.0
[   642.437] (++) using VT number 7

[   642.437] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[   642.438] (II) xfree86: Adding drm device (/dev/dri/card0)
[   642.444] (--) PCI:*(0:1:0:0) 1002:5964:1787:5964 rev 1, Mem @ 0xf0000000/134217728, 0xfe9e0000/65536, I/O @ 0x0000de00/256, BIOS @ 0x????????/131072
[   642.444] (--) PCI: (0:1:0:1) 1002:5d44:1787:5965 rev 1, Mem @ 0xe8000000/134217728, 0xfe9f0000/65536
[   642.444] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   642.444] (II) LoadModule: "glx"
[   642.445] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   642.447] (II) Module glx: vendor="X.Org Foundation"
[   642.447] 	compiled for 1.19.6, module version = 1.0.0
[   642.447] 	ABI class: X.Org Server Extension, version 10.0
[   642.447] (==) Matched ati as autoconfigured driver 0
[   642.447] (==) Matched ati as autoconfigured driver 1
[   642.448] (==) Matched modesetting as autoconfigured driver 2
[   642.448] (==) Matched fbdev as autoconfigured driver 3
[   642.448] (==) Matched vesa as autoconfigured driver 4
[   642.448] (==) Assigned the driver to the xf86ConfigLayout
[   642.448] (II) LoadModule: "ati"
[   642.448] (WW) Warning, couldn't open module ati
[   642.448] (II) UnloadModule: "ati"
[   642.448] (II) Unloading ati
[   642.448] (EE) Failed to load module "ati" (module does not exist, 0)
[   642.448] (II) LoadModule: "modesetting"
[   642.448] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   642.448] (II) Module modesetting: vendor="X.Org Foundation"
[   642.448] 	compiled for 1.19.6, module version = 1.19.6
[   642.448] 	Module class: X.Org Video Driver
[   642.448] 	ABI class: X.Org Video Driver, version 23.0
[   642.448] (II) LoadModule: "fbdev"
[   642.449] (WW) Warning, couldn't open module fbdev
[   642.449] (II) UnloadModule: "fbdev"
[   642.449] (II) Unloading fbdev
[   642.449] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   642.449] (II) LoadModule: "vesa"
[   642.449] (WW) Warning, couldn't open module vesa
[   642.449] (II) UnloadModule: "vesa"
[   642.449] (II) Unloading vesa
[   642.449] (EE) Failed to load module "vesa" (module does not exist, 0)
[   642.449] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   642.450] (II) modeset(0): using drv /dev/dri/card0
[   642.450] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   642.450] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[   642.450] (==) modeset(0): RGB weight 888
[   642.450] (==) modeset(0): Default visual is TrueColor
[   642.450] (II) Loading sub module "glamoregl"
[   642.450] (II) LoadModule: "glamoregl"
[   642.450] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[   642.452] (II) Module glamoregl: vendor="X.Org Foundation"
[   642.452] 	compiled for 1.19.6, module version = 1.0.0
[   642.452] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   642.452] (II) glamor: OpenGL accelerated X.org driver based.
[   642.468] (II) glamor: EGL version 1.4 (DRI2):
[   642.481] (II) modeset(0): glamor initialized
[   642.512] (II) modeset(0): Output VGA-1 has no monitor section
[   642.524] (II) modeset(0): Output DVI-I-1 has no monitor section
[   642.527] (II) modeset(0): Output SVIDEO-1 has no monitor section
[   642.558] (II) modeset(0): EDID for output VGA-1
[   642.558] (II) modeset(0): Manufacturer: DEL  Model: a00c  Serial#: 808671315
[   642.558] (II) modeset(0): Year: 2005  Week: 23
[   642.558] (II) modeset(0): EDID Version: 1.3
[   642.558] (II) modeset(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   642.558] (II) modeset(0): Sync:  Separate
[   642.558] (II) modeset(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[   642.558] (II) modeset(0): Gamma: 2.20
[   642.558] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[   642.558] (II) modeset(0): Default color space is primary color space
[   642.559] (II) modeset(0): First detailed timing is preferred mode
[   642.559] (II) modeset(0): redX: 0.631 redY: 0.347   greenX: 0.309 greenY: 0.582
[   642.559] (II) modeset(0): blueX: 0.149 blueY: 0.088   whiteX: 0.312 whiteY: 0.328
[   642.559] (II) modeset(0): Supported established timings:
[   642.559] (II) modeset(0): 720x400@70Hz
[   642.559] (II) modeset(0): 640x480@60Hz
[   642.559] (II) modeset(0): 640x480@72Hz
[   642.559] (II) modeset(0): 640x480@75Hz
[   642.559] (II) modeset(0): 800x600@56Hz
[   642.559] (II) modeset(0): 800x600@60Hz
[   642.559] (II) modeset(0): 800x600@72Hz
[   642.559] (II) modeset(0): 800x600@75Hz
[   642.559] (II) modeset(0): 1024x768@60Hz
[   642.559] (II) modeset(0): 1024x768@70Hz
[   642.559] (II) modeset(0): 1024x768@75Hz
[   642.559] (II) modeset(0): Manufacturer's mask: 0
[   642.559] (II) modeset(0): Supported detailed timing:
[   642.559] (II) modeset(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[   642.559] (II) modeset(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[   642.559] (II) modeset(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[   642.559] (II) modeset(0): Serial No: 6418056B03XS
[   642.559] (II) modeset(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 85 MHz
[   642.559] (II) modeset(0): Monitor name: DELL E153FP
[   642.559] (II) modeset(0): EDID (in hex):
[   642.559] (II) modeset(0): 	00ffffffffffff0010ac0ca053583330
[   642.559] (II) modeset(0): 	170f0103681e17782eb060a1584f9526
[   642.559] (II) modeset(0): 	165054afce0001010101010101010101
[   642.559] (II) modeset(0): 	01010101010164190040410026301888
[   642.559] (II) modeset(0): 	360030e410000018000000ff00363431
[   642.559] (II) modeset(0): 	3830353642303358530a000000fd0038
[   642.559] (II) modeset(0): 	4c1e3f08000a202020202020000000fc
[   642.559] (II) modeset(0): 	0044454c4c204531353346500a200011
[   642.559] (II) modeset(0): Printing probed modes for output VGA-1
[   642.559] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   642.559] (II) modeset(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   642.559] (II) modeset(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   642.559] (II) modeset(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   642.560] (II) modeset(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   642.560] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   642.560] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   642.560] (II) modeset(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   642.560] (II) modeset(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   642.560] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   642.560] (II) modeset(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   642.571] (II) modeset(0): EDID for output DVI-I-1
[   642.574] (II) modeset(0): EDID for output SVIDEO-1
[   642.574] (II) modeset(0): Output VGA-1 connected
[   642.574] (II) modeset(0): Output DVI-I-1 disconnected
[   642.574] (II) modeset(0): Output SVIDEO-1 disconnected
[   642.574] (II) modeset(0): Using exact sizes for initial modes
[   642.574] (II) modeset(0): Output VGA-1 using initial mode 1024x768 +0+0
[   642.574] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[   642.574] (==) modeset(0): DPI set to (96, 96)
[   642.574] (II) Loading sub module "fb"
[   642.574] (II) LoadModule: "fb"
[   642.574] (II) Loading /usr/lib/xorg/modules/libfb.so
[   642.575] (II) Module fb: vendor="X.Org Foundation"
[   642.575] 	compiled for 1.19.6, module version = 1.0.0
[   642.575] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   642.575] (==) Depth 24 pixmap format is 32 bpp
[   642.576] Require OpenGL version 2.1 or later.
[   642.576] (EE) modeset(0): Failed to initialize glamor at ScreenInit() time.
[   642.576] (EE) 
Fatal server error:
[   642.576] (EE) AddScreen/ScreenInit failed for driver 0
[   642.576] (EE) 
[   642.576] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   642.576] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   642.576] (EE) 
[   642.590] (EE) Server terminated with error (1). Closing log file.

My dmesg:

[    0.000000] Linux version 4.16.6-1.0-ARCH (builduser@slave) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Wed May 2 23:35:27 CEST 2018
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ff6ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007ff70000-0x000000007ff71fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007ff72000-0x000000007ff92fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007ff93000-0x000000007fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fecf0000-0x00000000fecf0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: Dell Computer Corporation Dimension 4600i              /0F4491, BIOS A10 05/17/2004
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7ff70 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] found SMP MP-table at [mem 0x000fe710-0x000fe71f] mapped at [(ptrval)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x12ffffff]
[    0.000000] Base memory trampoline at [(ptrval)] 9b000 size 16384
[    0.000000] BRK [0x12b77000, 0x12b77fff] PGTABLE
[    0.000000] BRK [0x12b78000, 0x12b79fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36fc1000-0x377d7fff]
[    0.000000] Allocated new RAMDISK: [mem 0x35fe7000-0x367fd840]
[    0.000000] Move RAMDISK from [mem 0x36fc1000-0x377d7840] to [mem 0x35fe7000-0x367fd840]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FEBA0 000014 (v00 DELL  )
[    0.000000] ACPI: RSDT 0x00000000000FD1B2 000034 (v01 DELL   4600     00000007 ASL  00000061)
[    0.000000] ACPI: FACP 0x00000000000FD1E6 000074 (v01 DELL   4600     00000007 ASL  00000061)
[    0.000000] ACPI: DSDT 0x00000000FFFCF632 0024C9 (v01 DELL   dt_ex    00001000 MSFT 0100000D)
[    0.000000] ACPI: FACS 0x000000007FF70000 000040
[    0.000000] ACPI: SSDT 0x00000000FFFD1AFB 0000A7 (v01 DELL   st_ex    00001000 MSFT 0100000D)
[    0.000000] ACPI: APIC 0x00000000000FD25A 00006C (v01 DELL   4600     00000007 ASL  00000061)
[    0.000000] ACPI: BOOT 0x00000000000FD2C6 000028 (v01 DELL   4600     00000007 ASL  00000061)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1175MB HIGHMEM available.
[    0.000000] 871MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 367fe000
[    0.000000]   low ram: 0 - 367fe000
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] BRK [0x12b7a000, 0x12b7afff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000367fdfff]
[    0.000000]   HighMem  [mem 0x00000000367fe000-0x000000007ff6ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ff6ffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ff6ffff]
[    0.000000] On node 0 totalpages: 524047
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   Normal zone: 2140 pages used for memmap
[    0.000000]   Normal zone: 219134 pages, LIFO batch:31
[    0.000000]   HighMem zone: 300914 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 97 pages
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 3 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x82/0x433 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 29 pages/cpu @(ptrval) s87244 r0 d31540 u118784
[    0.000000] pcpu-alloc: s87244 r0 d31540 u118784 alloc=29*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 521867
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b1099bb-fad0-45e9-9806-b2de458766d2 rw quiet
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] BRK [0x12b7b000, 0x12b7bfff] PGTABLE
[    0.000000] BRK [0x12b7c000, 0x12b7cfff] PGTABLE
[    0.000000] microcode: microcode updated early to revision 0x17, date = 2005-04-21
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000367fe:0007ff70)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2054336K/2096188K available (6613K kernel code, 658K rwdata, 2812K rodata, 796K init, 448K bss, 41852K reserved, 0K cma-reserved, 1203656K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffab5000 - 0xfffff000   (5416 kB)
                 cpu_entry : 0xfec00000 - 0xff5c1000   (9988 kB)
                   pkmap   : 0xfe800000 - 0xfec00000   (4096 kB)
                   vmalloc : 0xf6ffe000 - 0xfe7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf67fe000   ( 871 MB)
                     .init : 0xd29ed000 - 0xd2ab4000   ( 796 kB)
                     .data : 0xd26755dc - 0xd29ddb80   (3489 kB)
                     .text : 0xd2000000 - 0xd26755dc   (6613 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 29479 entries in 58 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 4352, nr_irqs: 456, preallocated irqs: 16
[    0.000000] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.019999] tsc: Fast TSC calibration using PIT
[    0.023333] tsc: Detected 2792.809 MHz processor
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2841b773402, max_idle_ns: 440795203611 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.35 BogoMIPS (lpj=9309363)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.023333] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.023333] CPU0: Hyper-Threading is disabled
[    0.023333] mce: CPU supports 4 MCE banks
[    0.023333] CPU0: Thermal monitoring enabled (TM1)
[    0.023333] process: using mwait in idle threads
[    0.023333] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.023333] Spectre V2 : Mitigation: Full generic retpoline
[    0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.039999] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz (family: 0xf, model: 0x3, stepping: 0x4)
[    0.050022] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.050040] ... version:                0
[    0.050041] ... bit width:              40
[    0.050043] ... generic registers:      18
[    0.050045] ... value mask:             000000ffffffffff
[    0.050046] ... max period:             0000007fffffffff
[    0.050047] ... fixed-purpose events:   0
[    0.050049] ... event mask:             000000000003ffff
[    0.056676] Hierarchical SRCU implementation.
[    0.076760] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.083342] smp: Bringing up secondary CPUs ...
[    0.083345] smp: Brought up 1 node, 1 CPU
[    0.083348] smpboot: Max logical packages: 4
[    0.083351] smpboot: Total of 1 processors activated (5587.35 BogoMIPS)
[    0.084237] devtmpfs: initialized
[    0.086734] PM: Registering ACPI NVS region [mem 0x7ff70000-0x7ff71fff] (8192 bytes)
[    0.086893] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.086900] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.087024] pinctrl core: initialized pinctrl subsystem
[    0.087203] RTC time: 15:02:03, date: 05/13/18
[    0.087370] NET: Registered protocol family 16
[    0.090024] cpuidle: using governor ladder
[    0.090036] cpuidle: using governor menu
[    0.090102] Simple Boot Flag value 0x87 read from CMOS RAM was invalid
[    0.090104] Simple Boot Flag at 0x7a set to 0x1
[    0.090173] ACPI: bus type PCI registered
[    0.090177] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.091546] PCI: PCI BIOS revision 2.10 entry at 0xfbb10, last bus=2
[    0.091548] PCI: Using configuration type 1 for base access
[    0.096771] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[    0.106901] ACPI: Added _OSI(Module Device)
[    0.106904] ACPI: Added _OSI(Processor Device)
[    0.106906] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.106908] ACPI: Added _OSI(Processor Aggregator Device)
[    0.130608] ACPI: Interpreter enabled
[    0.130672] ACPI: (supports S0 S1 S3 S4 S5)
[    0.130674] ACPI: Using IOAPIC for interrupt routing
[    0.130774] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.131033] ACPI: Enabled 8 GPEs in block 00 to 1F
[    0.185447] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.185460] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.185472] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.185478] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.187150] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.187154] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.187157] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.187160] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.187162] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored)
[    0.187165] PCI: root bus 00: using default resources
[    0.187458] PCI host bridge to bus 0000:00
[    0.187462] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.187466] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.187470] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.187489] pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
[    0.187496] pci 0000:00:00.0: Enabling MCH 'Overflow' Device
[    0.187513] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe1ffffff pref]
[    0.187724] pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
[    0.187911] pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
[    0.187931] pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
[    0.188155] pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
[    0.188213] pci 0000:00:1d.0: reg 0x20: [io  0xff80-0xff9f]
[    0.188406] pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
[    0.188465] pci 0000:00:1d.1: reg 0x20: [io  0xff60-0xff7f]
[    0.188655] pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
[    0.188713] pci 0000:00:1d.2: reg 0x20: [io  0xff40-0xff5f]
[    0.188899] pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
[    0.188956] pci 0000:00:1d.3: reg 0x20: [io  0xff20-0xff3f]
[    0.189156] pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
[    0.189186] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[    0.189295] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.189446] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
[    0.189656] pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
[    0.189740] pci 0000:00:1f.0: HPET at 0xfed00000
[    0.189750] pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
[    0.189756] pci 0000:00:1f.0: quirk: [io  0x0880-0x08bf] claimed by ICH4 GPIO
[    0.190030] pci 0000:00:1f.1: [8086:24db] type 00 class 0x01018a
[    0.190053] pci 0000:00:1f.1: reg 0x10: [io  0x01f0-0x01f7]
[    0.190065] pci 0000:00:1f.1: reg 0x14: [io  0x03f4-0x03f7]
[    0.190077] pci 0000:00:1f.1: reg 0x18: [io  0x0170-0x0177]
[    0.190089] pci 0000:00:1f.1: reg 0x1c: [io  0x0374-0x0377]
[    0.190102] pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
[    0.190114] pci 0000:00:1f.1: reg 0x24: [mem 0xfebffc00-0xfebfffff]
[    0.190130] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.190133] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.190136] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.190139] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.190291] pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018f
[    0.190312] pci 0000:00:1f.2: reg 0x10: [io  0xfe00-0xfe07]
[    0.190323] pci 0000:00:1f.2: reg 0x14: [io  0xfe10-0xfe13]
[    0.190334] pci 0000:00:1f.2: reg 0x18: [io  0xfe20-0xfe27]
[    0.190345] pci 0000:00:1f.2: reg 0x1c: [io  0xfe30-0xfe33]
[    0.190355] pci 0000:00:1f.2: reg 0x20: [io  0xfea0-0xfeaf]
[    0.190518] pci 0000:00:1f.3: [8086:24d3] type 00 class 0x0c0500
[    0.190576] pci 0000:00:1f.3: reg 0x20: [io  0xeda0-0xedbf]
[    0.190748] pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
[    0.190772] pci 0000:00:1f.5: reg 0x10: [io  0xee00-0xeeff]
[    0.190783] pci 0000:00:1f.5: reg 0x14: [io  0xedc0-0xedff]
[    0.190795] pci 0000:00:1f.5: reg 0x18: [mem 0xfebffa00-0xfebffbff]
[    0.190806] pci 0000:00:1f.5: reg 0x1c: [mem 0xfebff900-0xfebff9ff]
[    0.190867] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[    0.191056] pci 0000:01:00.0: [1002:5964] type 00 class 0x030000
[    0.191079] pci 0000:01:00.0: reg 0x10: [mem 0xf0000000-0xf7ffffff pref]
[    0.191090] pci 0000:01:00.0: reg 0x14: [io  0xde00-0xdeff]
[    0.191100] pci 0000:01:00.0: reg 0x18: [mem 0xfe9e0000-0xfe9effff]
[    0.191130] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    0.191170] pci 0000:01:00.0: supports D1 D2
[    0.191236] pci 0000:01:00.1: [1002:5d44] type 00 class 0x038000
[    0.191256] pci 0000:01:00.1: reg 0x10: [mem 0xe8000000-0xefffffff pref]
[    0.191267] pci 0000:01:00.1: reg 0x14: [mem 0xfe9f0000-0xfe9fffff]
[    0.191335] pci 0000:01:00.1: supports D1 D2
[    0.191431] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.191437] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.191442] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.191447] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xf7ffffff pref]
[    0.191506] pci 0000:02:01.0: [14f1:2f20] type 00 class 0x078000
[    0.191531] pci 0000:02:01.0: reg 0x10: [mem 0xfe8f0000-0xfe8fffff]
[    0.191543] pci 0000:02:01.0: reg 0x14: [io  0xcf38-0xcf3f]
[    0.191621] pci 0000:02:01.0: PME# supported from D3hot D3cold
[    0.191705] pci 0000:02:08.0: [8086:1050] type 00 class 0x020000
[    0.191729] pci 0000:02:08.0: reg 0x10: [mem 0xfe8ef000-0xfe8effff]
[    0.191741] pci 0000:02:08.0: reg 0x14: [io  0xcf40-0xcf7f]
[    0.191819] pci 0000:02:08.0: supports D1 D2
[    0.191822] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.191914] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.191921] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.191927] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.191932] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.191936] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.191951] pci_bus 0000:00: on NUMA node 0
[    0.202749] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[    0.203266] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 9 10 11 12 15)
[    0.203794] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[    0.204311] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.204827] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[    0.205358] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[    0.205874] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 9 10 11 12 15)
[    0.206387] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[    0.206749] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.206754] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.206757] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.206759] vgaarb: loaded
[    0.207071] EDAC MC: Ver: 3.0.0
[    0.213377] PCI: Using ACPI for IRQ routing
[    0.213382] PCI: pci_cache_line_size set to 64 bytes
[    0.213448] e820: reserve RAM buffer [mem 0x7ff70000-0x7fffffff]
[    0.213646] NetLabel: Initializing
[    0.213648] NetLabel:  domain hash size = 128
[    0.213649] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.213673] NetLabel:  unlabeled traffic allowed by default
[    0.214616] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.214627] hpet clockevent registered
[    0.214637] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.214644] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.214652] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.216742] clocksource: Switched to clocksource tsc-early
[    0.237660] VFS: Disk quotas dquot_6.6.0
[    0.237699] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.237842] pnp: PnP ACPI init
[    0.242199] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.242205] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved
[    0.242211] system 00:00: [mem 0x01000000-0x7ff6ffff] could not be reserved
[    0.242217] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved
[    0.242222] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[    0.242226] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[    0.242229] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.242233] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved
[    0.242237] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.242240] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved
[    0.242253] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.245718] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.249077] pnp 00:02: [dma 2]
[    0.249346] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.250482] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.257243] pnp 00:04: [dma 0 disabled]
[    0.257814] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.259689] pnp 00:05: disabling [io  0x0800-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.259694] pnp 00:05: disabling [io  0x0860-0x08ff] because it overlaps 0000:00:1f.0 BAR 13 [io  0x0800-0x087f]
[    0.259745] system 00:05: [io  0x0c00-0x0c7f] has been reserved
[    0.259757] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.260748] pnp: PnP ACPI: found 6 devices
[    0.298510] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.298542] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.298549] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.298555] pci 0000:00:01.0:   bridge window [mem 0xfe900000-0xfeafffff]
[    0.298561] pci 0000:00:01.0:   bridge window [mem 0xe2000000-0xf7ffffff pref]
[    0.298569] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.298574] pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
[    0.298580] pci 0000:00:1e.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.298592] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.298596] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.298599] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.298602] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
[    0.298605] pci_bus 0000:01: resource 2 [mem 0xe2000000-0xf7ffffff pref]
[    0.298608] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    0.298611] pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.298614] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.298617] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.298717] NET: Registered protocol family 2
[    0.299051] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[    0.299062] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.299084] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.299119] TCP: Hash tables configured (established 8192 bind 8192)
[    0.299180] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.299190] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.299273] NET: Registered protocol family 1
[    0.302227] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.302248] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[    0.302255] PCI: CLS 64 bytes, default 64
[    0.302353] Unpacking initramfs...
[    0.522959] Freeing initrd memory: 8284K
[    0.523134] apm: BIOS not found.
[    0.523226] Scanning for low memory corruption every 60 seconds
[    0.524171] Initialise system trusted keyrings
[    0.524192] Key type blacklist registered
[    0.524284] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    0.526862] zbud: loaded
[    0.529719] Key type asymmetric registered
[    0.529721] Asymmetric key parser 'x509' registered
[    0.529743] bounce: pool size: 64 pages
[    0.529813] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.533283] io scheduler noop registered
[    0.533285] io scheduler deadline registered
[    0.533381] io scheduler cfq registered (default)
[    0.533384] io scheduler mq-deadline registered
[    0.533385] io scheduler kyber registered
[    0.533475] io scheduler bfq registered
[    0.534051] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.534053] vesafb: scrolling: redraw
[    0.534057] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.534082] vesafb: framebuffer at 0xf0000000, mapped to 0x(ptrval), using 3072k, total 3072k
[    0.614963] Console: switching to colour frame buffer device 128x48
[    0.695548] fb0: VESA VGA frame buffer device
[    0.695665] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.695703] ACPI: Power Button [VBTN]
[    0.695808] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.695830] ACPI: Power Button [PWRF]
[    0.700053] isapnp: Scanning for PnP cards...
[    1.013063] isapnp: No Plug & Play device found
[    1.013210] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.033429] ledtrig-cpu: registered to indicate activity on CPUs
[    1.033848] NET: Registered protocol family 10
[    1.046430] Segment Routing with IPv6
[    1.046480] NET: Registered protocol family 17
[    1.050169] RAS: Correctable Errors collector initialized.
[    1.050243] microcode: sig=0xf34, pf=0x4, revision=0x17
[    1.050324] microcode: Microcode Update Driver: v2.2.
[    1.050332] Using IPI No-Shortcut mode
[    1.050343] sched_clock: Marking stable (1050007073, 0)->(1131096820, -81089747)
[    1.050609] registered taskstats version 1
[    1.050631] Loading compiled-in X.509 certificates
[    1.050661] zswap: loaded using pool lzo/zbud
[    1.056847] Key type big_key registered
[    1.057155]   Magic number: 2:522:32
[    1.057224] hctosys: unable to open rtc device (rtc0)
[    1.062753] Freeing unused kernel memory: 796K
[    1.062835] Write protecting the kernel text: 6616k
[    1.062912] Write protecting the kernel read-only data: 2828k
[    1.276531] i8042: PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
[    1.276535] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    1.277542] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.295705] ACPI: bus type USB registered
[    1.295755] usbcore: registered new interface driver usbfs
[    1.295782] usbcore: registered new interface driver hub
[    1.300627] FDC 0 is a post-1991 82077
[    1.310153] usbcore: registered new device driver usb
[    1.311853] SCSI subsystem initialized
[    1.312988] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.313315] ehci-pci: EHCI PCI platform driver
[    1.314438] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.314452] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.314471] ehci-pci 0000:00:1d.7: debug port 1
[    1.323432] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    1.323469] ehci-pci 0000:00:1d.7: irq 23, io mem 0xffa80800
[    1.327153] libata version 3.00 loaded.
[    1.336737] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.336884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.336888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.336891] usb usb1: Product: EHCI Host Controller
[    1.336894] usb usb1: Manufacturer: Linux 4.16.6-1.0-ARCH ehci_hcd
[    1.336897] usb usb1: SerialNumber: 0000:00:1d.7
[    1.337148] hub 1-0:1.0: USB hub found
[    1.337165] hub 1-0:1.0: 8 ports detected
[    1.337817] ata_piix 0000:00:1f.1: version 2.13
[    1.339588] uhci_hcd: USB Universal Host Controller Interface driver
[    1.345175] scsi host0: ata_piix
[    1.352112] scsi host1: ata_piix
[    1.352229] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    1.352233] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    1.352813] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[    1.358820] scsi host2: ata_piix
[    1.365862] scsi host3: ata_piix
[    1.365973] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18
[    1.365977] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18
[    1.366487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.366499] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.366509] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.366549] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[    1.366725] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.366729] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.366732] usb usb2: Product: UHCI Host Controller
[    1.366735] usb usb2: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[    1.366737] usb usb2: SerialNumber: 0000:00:1d.0
[    1.366968] hub 2-0:1.0: USB hub found
[    1.366986] hub 2-0:1.0: 2 ports detected
[    1.367558] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.367569] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.367578] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.367612] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[    1.367724] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.367728] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.367731] usb usb3: Product: UHCI Host Controller
[    1.367733] usb usb3: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[    1.367736] usb usb3: SerialNumber: 0000:00:1d.1
[    1.367941] hub 3-0:1.0: USB hub found
[    1.367957] hub 3-0:1.0: 2 ports detected
[    1.368486] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.368496] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.368504] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.368526] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    1.369054] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.369059] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.369062] usb usb4: Product: UHCI Host Controller
[    1.369064] usb usb4: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[    1.369067] usb usb4: SerialNumber: 0000:00:1d.2
[    1.369297] hub 4-0:1.0: USB hub found
[    1.369314] hub 4-0:1.0: 2 ports detected
[    1.369888] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.369898] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.369907] uhci_hcd 0000:00:1d.3: detected 2 ports
[    1.369932] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20
[    1.370070] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.370074] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.370077] usb usb5: Product: UHCI Host Controller
[    1.370080] usb usb5: Manufacturer: Linux 4.16.6-1.0-ARCH uhci_hcd
[    1.370082] usb usb5: SerialNumber: 0000:00:1d.3
[    1.370291] hub 5-0:1.0: USB hub found
[    1.371339] hub 5-0:1.0: 2 ports detected
[    1.416294] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.515915] ata2.00: ATAPI: _NEC DVD+/-RW ND-3530A, 102B, max UDMA/33
[    1.520543] ata2.00: configured for UDMA/33
[    1.528289] ata1.00: ATA-6: WDC WD1600BB-22GUC0, 08.02D08, max UDMA/100
[    1.528293] ata1.00: 312581808 sectors, multi 8: LBA48 
[    1.546696] tsc: Refined TSC clocksource calibration: 2793.000 MHz
[    1.546706] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28426c46e09, max_idle_ns: 440795320975 ns
[    1.546724] clocksource: Switched to clocksource tsc
[    1.551517] ata1.00: configured for UDMA/100
[    1.551777] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BB-22G 2D08 PQ: 0 ANSI: 5
[    1.554919] scsi 1:0:0:0: CD-ROM            _NEC     DVD+-RW ND-3530A 102B PQ: 0 ANSI: 5
[    1.555062] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[    1.555088] sd 0:0:0:0: [sda] Write Protect is off
[    1.555092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.555135] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.579216]  sda: sda1 sda2
[    1.580333] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.581377] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.581381] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.582030] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.830051] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    2.016995] usb 2-2: New USB device found, idVendor=276d, idProduct=1119
[    2.016999] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.017002] usb 2-2: Product: G Mouse
[    2.017005] usb 2-2: Manufacturer: YSTEK
[    2.024313] hidraw: raw HID events driver (C) Jiri Kosina
[    2.039307] usbcore: registered new interface driver usbhid
[    2.039310] usbhid: USB HID core driver
[    2.042226] input: YSTEK G Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/0003:276D:1119.0001/input/input3
[    2.042458] hid-generic 0003:276D:1119.0001: input,hidraw0: USB HID v1.10 Mouse [YSTEK G Mouse] on usb-0000:00:1d.0-2/input0
[    6.208550] random: fast init done
[    6.678693] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    8.056320] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    8.056541] systemd[1]: Detected architecture x86.
[    8.074328] systemd[1]: Set hostname to <Susan-PC>.
[    8.594203] random: crng init done
[    9.354922] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    9.355168] systemd[1]: Listening on LVM2 poll daemon socket.
[    9.411208] systemd[1]: Created slice system-getty.slice.
[    9.411360] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    9.411861] systemd[1]: Created slice User and Session Slice.
[    9.411924] systemd[1]: Reached target Remote File Systems.
[    9.412054] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    9.840935] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[   10.202474] systemd-journald[189]: Received request to flush runtime journal from PID 1
[   13.483632] parport_pc 00:04: reported by Plug and Play ACPI
[   13.483719] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[   13.675225] rtc_cmos 00:01: RTC can wake from S4
[   13.675411] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[   13.675448] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram, hpet irqs
[   14.025088] intel_rng: Firmware space is locked read-only. If you can't or
               intel_rng: don't want to disable this in firmware setup, and if
               intel_rng: you are certain that your system has a functional
               intel_rng: RNG, try using the 'no_fwh_detect' option.
[   14.103815] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   14.250504] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   14.258598] mousedev: PS/2 mouse device common for all mice
[   14.315374] Linux agpgart interface v0.103
[   14.450788] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[   14.456183] agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[   14.776010] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   15.130476] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[   15.130480] e100: Copyright(c) 1999-2006 Intel Corporation
[   15.148688] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   15.166880] e100 0000:02:08.0 eth0: addr 0xfe8ef000, irq 20, MAC addr 00:11:11:20:55:be
[   15.198423] ppdev: user-space parallel port driver
[   15.207377] iTCO_vendor_support: vendor-support=0
[   15.210487] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   15.210554] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[   15.211277] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.854939] Adding 4194300k swap on /dev/sda1.  Priority:-2 extents:1 across:4194300k FS
[   15.896853] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 56521 usecs (2723 samples)
[   15.896859] snd_intel8x0 0000:00:1f.5: clocking to 48000
[   15.950082] [drm] radeon kernel modesetting enabled.
[   15.954436] checking generic (f0000000 300000) vs hw (f0000000 8000000)
[   15.954441] fb: switching to radeondrmfb from VESA VGA
[   15.954487] Console: switching to colour dummy device 80x25
[   15.960455] [drm] initializing kernel modesetting (RV280 0x1002:0x5964 0x1787:0x5964 0x01).
[   15.960588] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[   15.960604] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[   15.960638] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[   15.960655] radeon 0000:01:00.0: GTT: 32M 0xE0000000 - 0xE1FFFFFF
[   15.960659] [drm] Generation 2 PCI interface, using max accessible memory
[   15.960665] radeon 0000:01:00.0: VRAM: 128M 0x00000000F0000000 - 0x00000000F7FFFFFF (128M used)
[   15.960678] [drm] Detected VRAM RAM=128M, BAR=128M
[   15.960680] [drm] RAM width 64bits DDR
[   15.964479] [TTM] Zone  kernel: Available graphics memory: 429880 kiB
[   15.964482] [TTM] Zone highmem: Available graphics memory: 1031708 kiB
[   15.964484] [TTM] Initializing pool allocator
[   15.964492] [TTM] Initializing DMA pool allocator
[   15.964533] [drm] radeon: 128M of VRAM memory ready
[   15.964536] [drm] radeon: 32M of GTT memory ready.
[   15.973974] e100 0000:02:08.0 enp2s8: renamed from eth0
[   15.982340] radeon 0000:01:00.0: WB disabled
[   15.982350] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000e0000000 and cpu addr 0x853ef928
[   15.982354] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.982355] [drm] Driver supports precise vblank timestamp query.
[   15.982370] [drm] radeon: irq initialized.
[   15.982394] [drm] Loading R200 Microcode
[   16.276442] [drm] radeon: ring at 0x00000000E0001000
[   16.276468] [drm] ring test succeeded in 0 usecs
[   16.277022] [drm] ib test succeeded in 0 usecs
[   16.278630] [drm] Radeon Display Connectors
[   16.278632] [drm] Connector 0:
[   16.278634] [drm]   VGA-1
[   16.278637] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[   16.278638] [drm]   Encoders:
[   16.278640] [drm]     CRT1: INTERNAL_DAC1
[   16.278641] [drm] Connector 1:
[   16.278642] [drm]   DVI-I-1
[   16.278644] [drm]   HPD1
[   16.278646] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[   16.278647] [drm]   Encoders:
[   16.278648] [drm]     CRT2: INTERNAL_DAC2
[   16.278650] [drm]     DFP1: INTERNAL_TMDS1
[   16.278651] [drm] Connector 2:
[   16.278652] [drm]   SVIDEO-1
[   16.278653] [drm]   Encoders:
[   16.278654] [drm]     TV1: INTERNAL_DAC2
[   16.341333] [drm] fb mappable at 0xF0040000
[   16.341337] [drm] vram apper at 0xF0000000
[   16.341338] [drm] size 3145728
[   16.341340] [drm] fb depth is 24
[   16.341341] [drm]    pitch is 4096
[   16.341684] fbcon: radeondrmfb (fb0) is primary device
[   16.408494] Console: switching to colour frame buffer device 128x48
[   16.425617] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   16.443439] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   17.101045] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[   17.103488] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[   17.103589] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[   17.959817] 8021q: 802.1Q VLAN Support v1.8
[   18.084809] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   18.096884] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   18.096951] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   18.096955] cfg80211: failed to load regulatory.db

I'm going to assume you just want the sddm logs. Here's the last 100 lines:

-- Logs begin at Sun 2018-05-13 10:04:27 EDT, end at Sun 2018-05-13 11:32:09 EDT. --
May 13 11:25:31 Susan-PC systemd[1]: Started Simple Desktop Display Manager.
May 13 11:25:32 Susan-PC sddm[357]: Initializing...
May 13 11:25:32 Susan-PC sddm[357]: Logind interface found
May 13 11:25:32 Susan-PC sddm[357]: Starting...
May 13 11:25:32 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:32 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:32 Susan-PC sddm[357]: Display server starting...
May 13 11:25:32 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{53c33077-fd93-4f50-b387-5d2bd0c0f103} -background none -noreset -displayfd 17 -seat seat0 vt1
May 13 11:25:34 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:34 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:34 Susan-PC sddm[357]: Display server started.
May 13 11:25:34 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:34 Susan-PC sddm[357]: Socket server started.
May 13 11:25:34 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:34 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:34 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{53c33077-fd93-4f50-b387-5d2bd0c0f103}"
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] Starting...
May 13 11:25:34 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:34 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:34 Susan-PC sddm-helper[363]: pam_unix(sddm-greeter:session): session opened for user sddm by (uid=0)
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] Authenticating...
May 13 11:25:34 Susan-PC sddm-helper[363]: [PAM] returning.
May 13 11:25:34 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:34 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:34 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:34 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:34 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:34 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:34 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:34 Susan-PC sddm[357]: Display server starting...
May 13 11:25:34 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{aa9d0899-6e83-4aa9-9c96-ac2f52670e1f} -background none -noreset -displayfd 20 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{aa9d0899-6e83-4aa9-9c96-ac2f52670e1f}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{25acafee-fbf6-468d-bbfb-094dae7b2364} -background none -noreset -displayfd 18 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] Authenticating...
May 13 11:25:35 Susan-PC sddm-helper[377]: [PAM] returning.
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{25acafee-fbf6-468d-bbfb-094dae7b2364}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{3d328390-e1a7-4952-8ad3-302fe0f0a7f6} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] Authenticating...
May 13 11:25:35 Susan-PC sddm-helper[383]: [PAM] returning.
May 13 11:25:35 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:35 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:35 Susan-PC sddm[357]: Display server started.
May 13 11:25:35 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:35 Susan-PC sddm[357]: Socket server started.
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:35 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{3d328390-e1a7-4952-8ad3-302fe0f0a7f6}"
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:35 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:35 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:35 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:35 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:35 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:35 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:35 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:35 Susan-PC sddm[357]: Display server starting...
May 13 11:25:35 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{dcfcefed-9b8e-49a4-8d49-77fa0fa0ae22} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:35 Susan-PC sddm-helper[389]: [PAM] Starting...
May 13 11:25:35 Susan-PC sddm-helper[389]: [PAM] Authenticating...
[root@Susan-PC ~]# journalctl --since "20 min ago" -u sddm | tail -n 100
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{0af58317-aea5-45ef-b47d-5a704089c912} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[907]: [PAM] returning.
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{0af58317-aea5-45ef-b47d-5a704089c912}"
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{95b83ef8-f7d5-4090-9099-a4c01cbc6a8f} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[913]: [PAM] returning.
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{95b83ef8-f7d5-4090-9099-a4c01cbc6a8f}"
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{98a984d7-07f0-48e6-a9e4-e283f8f99d7e} -background none -noreset -displayfd 19 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[919]: [PAM] returning.
May 13 11:25:56 Susan-PC systemd[1]: Stopping Simple Desktop Display Manager...
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:56 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:56 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:56 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:56 Susan-PC sddm[357]: Display server started.
May 13 11:25:56 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:56 Susan-PC sddm[357]: Socket server started.
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:56 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{98a984d7-07f0-48e6-a9e4-e283f8f99d7e}"
May 13 11:25:56 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:56 Susan-PC sddm[357]: Signal received: SIGTERM
May 13 11:25:56 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:56 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:56 Susan-PC sddm[357]: Removing display "" ...
May 13 11:25:56 Susan-PC sddm[357]: Adding new display on vt 1 ...
May 13 11:25:56 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:56 Susan-PC sddm[357]: Display server starting...
May 13 11:25:56 Susan-PC sddm[357]: Running: /usr/bin/X -nolisten tcp -auth /var/run/sddm/{b0363716-469f-420d-8bb2-db337b897121} -background none -noreset -displayfd 18 -seat seat0 vt1
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] Starting...
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] Authenticating...
May 13 11:25:56 Susan-PC sddm-helper[929]: [PAM] returning.
May 13 11:25:57 Susan-PC sddm[357]: Setting default cursor
May 13 11:25:57 Susan-PC sddm[357]: Running display setup script  "/usr/share/sddm/scripts/Xsetup"
May 13 11:25:57 Susan-PC sddm[357]: Display server started.
May 13 11:25:57 Susan-PC sddm[357]: Socket server starting...
May 13 11:25:57 Susan-PC sddm[357]: Socket server started.
May 13 11:25:57 Susan-PC sddm[357]: Loading theme configuration from ""
May 13 11:25:57 Susan-PC sddm[357]: Greeter starting...
May 13 11:25:57 Susan-PC sddm[357]: Adding cookie to "/var/run/sddm/{b0363716-469f-420d-8bb2-db337b897121}"
May 13 11:25:57 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):1:  bad "remove" command line
May 13 11:25:57 Susan-PC sddm[357]: /usr/bin/xauth: (stdin):2:  bad "add" command line
May 13 11:25:57 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:57 Susan-PC sddm[357]: Socket server stopping...
May 13 11:25:57 Susan-PC sddm[357]: Socket server stopped.
May 13 11:25:57 Susan-PC sddm[357]: Display server stopping...
May 13 11:25:57 Susan-PC sddm[357]: Display server stopped.
May 13 11:25:57 Susan-PC sddm[357]: Running display stop script  "/usr/share/sddm/scripts/Xstop"
May 13 11:25:57 Susan-PC sddm[357]: QProcess: Destroyed while process ("/usr/lib/sddm/sddm-helper") is still running.
May 13 11:25:57 Susan-PC systemd[1]: Stopped Simple Desktop Display Manager.

Seems to be looping due to some errors...

Oh, almost forgot this computer's system specs. They're not very great. Here's a screenfetch:

                   -`                 
                  .o+`                 root@Susan-PC
                 `ooo/                 OS: Arch Linux 
                `+oooo:                Kernel: i686 Linux 4.16.6-1.0-ARCH
               `+oooooo:               Uptime: 15m
               -+oooooo+:              Packages: 362
             `/:-:++oooo+:             Shell: bash 4.4.19
            `/++++/+++++++:            CPU: Intel Pentium 4 2.80GHz @ 2.793GHz
           `/++++++++++++++:           GPU: AMD/ATI RV280 [Radeon 9200 SE]
          `/+++ooooooooooooo/`         RAM: 36MiB / 2015MiB
         ./ooosssso++osssssso+`       
        .oossssso-````/ossssss+`      
       -osssssso.      :ssssssso.     
      :osssssss/        osssso+++.    
     /ossssssss/        +ssssooo/-    
   `/ossssso+/:-        -:/+osssso+-  
  `+sso+:-`                 `.-/+oso: 
 `++:.                           `-/+/
 .`                                 `/

Offline

#5 2018-05-13 17:32:45

ARandomScientist
Member
Registered: 2018-05-13
Posts: 2

Re: help with install?

I realized that I installed xf86-video-intel instead of what I needed, xf86-video-ati. Switching to the correct driver showed some progress, a mouse on a black screen, but now after about 5 minutes the screen is still black and the mouse is gone.

I'll be looking into this new issue shortly, and perhaps make another topic, if more appropriate.

Offline

#6 2018-05-14 08:10:15

andreas_baumann
Administrator
From: Zurich, Switzerland
Registered: 2017-08-10
Posts: 833
Website

Re: help with install?

Following https://www.cnet.com/products/dell-dime … -17/specs/ you seem
to have a "Intel Extreme Graphics 2 shared video memory (UMA)" graphic chip.

http://thinkwiki.org/wiki/Intel_Extreme_Graphics_2

I would go in the direction of 'intelfb'.

Offline

Board footer

Powered by FluxBB