You are not logged in.
Pages: 1
Hello,
if i make this "pacman -Syu" my LXQt doesn`t start.
:: Synchronisiere Paketdatenbanken...
core 157,3 KiB 787 KiB/s 00:00 [################################] 100%
extra 2,0 MiB 825 KiB/s 00:02 [################################] 100%
community 5,1 MiB 833 KiB/s 00:06 [################################] 100%
:: Starte vollständige Systemaktualisierung...
Warnung: python-pyparsing: Ignoriere Paket-Aktualisierung (2.4.4-1.0 => 2.4.5-1.0)
Löse Abhängigkeiten auf...
Suche nach in Konflikt stehenden Paketen...
Pakete (94) alsa-lib-1.2.1.2-2.0 alsa-topology-conf-1.2.1-1.0 alsa-ucm-conf-1.2.1.2-1.0
audit-2.8.5-6.0 avahi-0.7+18+g1b5f401-3.0 blueman-2.1.1-2.0 bluez-5.52-1.2
bluez-libs-5.52-1.2 brotli-1.0.7-3.0 btrfs-progs-5.3.1-3.1 cifs-utils-6.9-1.3
cups-2.3.0-4.2 falkon-3.1.0-8.0 file-5.37-5.0 firefox-70.0.1-3.2 gc-8.0.4-3.0
gobject-introspection-runtime-1.62.0-3.0 gpgme-1.13.1-3.8 gptfdisk-1.0.4-1.4
gtk-update-icon-cache-1:3.24.13-1.1 gtk3-1:3.24.13-1.1 hexchat-2.14.2-6.0
iproute2-5.4.0-1.0 libcap-ng-0.7.10-1.0 libcups-2.3.0-4.2
libdbusmenu-qt5-0.9.3+16.04.20160218-4.2 libfm-qt-0.14.1-1.3 libgusb-0.3.1-1.0
libimobiledevice-1.2.0+87+g92c5462-5.0 liblouis-3.11.0-3.0 libmm-glib-1.12.0-2.0
libnm-1.20.8-1.1 libnma-1.8.24-1.2 libplist-2.1.0-2.0 libproxy-0.4.15-13.0
libqtxdg-3.4.0-1.1 librsvg-2:2.46.4-1.1 libteam-1.29-4.0 libutil-linux-2.34-8.0
libvoikko-4.3-1.0 libxml2-2.9.9-6.0 lightdm-1:1.30.0-2.3 link-grammar-5.7.0-2.0
linux-5.3.13.1-1.4 lximage-qt-0.14.1-2.1 lxqt-config-0.14.1-1.4
lxqt-powermanagement-0.14.1-1.3 lxqt-qtplugin-0.14.0-2.3 mc-4.8.23-1.4
mesa-19.2.6-1.0 network-manager-applet-1.8.24-1.2 networkmanager-1.20.8-1.1
nm-connection-editor-1.8.24-1.2 notepadqq-1.4.8-2.3 obconf-qt-0.14.1-1.1
polkit-qt5-0.113.0-1.2 python-3.8.0-1.0 python-appdirs-1.4.3-5.0
python-cairo-1.18.2-3.1 python-dbus-1.2.14-1.0 python-dbus-common-1.2.14-1.0
python-docopt-0.6.2-7.0 python-keyutils-0.6-4.1 python-ordered-set-3.1.1-1.0
python-packaging-19.2-5.0 python-setuptools-1:41.6.0-1.0 python-six-1.13.0-2.0
python-yaml-5.1.2-3.0 qt5-declarative-5.13.2-1.1 qt5-multimedia-5.13.2-1.0
qt5-sensors-5.13.2-1.1 qt5-svg-5.13.2-1.1 qt5-tools-5.13.2-1.0
qt5-webchannel-5.13.2-1.0 qt5-webengine-5.13.2-2.0 qt5-x11extras-5.13.2-1.1
qt5-xmlpatterns-5.13.2-1.1 qterminal-0.14.1-1.3 qtermwidget-0.14.1-1.5
rubberband-1.8.2-3.1 speedcrunch-0.12.0-2.4 systemd-243.162-2.0
systemd-libs-243.162-2.0 systemd-sysvcompat-243.162-2.0 talloc-2.3.0-1.0
tdb-1.3.18-4.1 tevent-1:0.9.39-4.1 udiskie-1.7.7-2.0 util-linux-2.34-8.0
x264-3:0.157.r2980.34c06d1-2.0 xf86-video-intel-1:2.99.917+897+g0867eea6-1.0
xorg-server-1.20.6-1.0 xorg-server-common-1.20.6-1.0 youtube-dl-2019.11.28-1.0
Gesamtgröße des Downloads: 290,47 MiB
Gesamtgröße der installierten Pakete: 1016,26 MiB
Größendifferenz der Aktualisierung: -5,07 MiBLightdm start's - black screen - Lightdm t's again
How can i solved the problem?
Greetz
arch32yes
Last edited by arch32yes (2019-12-10 20:52:18)
Offline
Ah, makes me glad I stopped using a display manager and instead just startx manually after logging into the terminal. I even used to use lightdm by choice as well.
The workaround to achieve that state as I understand it is to:
systemctl disable lightdm.service
Add the appropriate incantation to the .xinitrc in your login user's root folder. I use a minimised lxde/openbox myself and the magic word for that is 'startlxde' on a new line at the end of the file, I imagine there's something similar for your desktop environment
Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.
Offline
Same here, every qt app does complain about incompatible libraries and dumbs core.
I've no terminal which allows me copying... but
pacman -Q |grep qt5 shows for all 5.13.2-* but for qt5-base it's 5.13.1-2.2
Please update it...
Offline
Hello Developer,
did you have solved this problem?
Greetz
arch32yes
Offline
The one qt test app I use 'keepassxc' started working after updates to both it and the qt-base package (as I recall), but that's a rather different beastie to lightdm. The only way to find it it to try it and see.
Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.
Offline
Ok, both lightdm and LxQt work in i686 and pentium4 on my qemu test machines.
So, the only option is it doesn't run on real SSE2 hardware for i686, but I'm not close to those real machines at the moment..
..so I'll test later.
Offline
I just installed and tested lightdm with lightdm-gtk-greeter on my eeepc. It launched, but I couldn't get it to talk to my keyboard and mouse, and I had a bit of trouble killing it so I could carry on with my normal session (turned out I needed to kill the zephyr and light-dm processes at the same time, doing them sequentially resulted in them restarting each other). But it runs and never crashed, so I'd count that as a good sign even if I can't actually test it out.
Architecture: pentium4, Testing repos: Yes, Hardware: EeePC 901+2GB RAM+OS half on the SD card.
Offline
Hello, now my System works.
pacman -Syu
:: Synchronisiere Paketdatenbanken...
core 156,8 KiB 825 KiB/s 00:00 [################################] 100%
extra 2,0 MiB 836 KiB/s 00:02 [################################] 100%
community 5,2 MiB 829 KiB/s 00:06 [################################] 100%
:: Starte vollständige Systemaktualisierung...
Löse Abhängigkeiten auf...
Suche nach in Konflikt stehenden Paketen...
Pakete (147) abiword-3.0.4-1.0 alsa-lib-1.2.1.2-2.0 alsa-topology-conf-1.2.1-1.0
alsa-ucm-conf-1.2.1.2-1.0 audit-2.8.5-6.0 avahi-0.7+18+g1b5f401-3.1
blueman-2.1.1-2.0 bluez-5.52-1.2 bluez-libs-5.52-1.2 boost-libs-1.71.0-4.1
brotli-1.0.7-3.0 btrfs-progs-5.3.1-3.1 ca-certificates-mozilla-3.48-1.0
chromium-78.0.3904.108-1.0 cifs-utils-6.9-1.3 cups-2.3.0-4.2 curl-7.67.0-3.4
dav1d-0.5.2-1.0 falkon-3.1.0-8.0 ffmpeg-1:4.2.1-4.3 file-5.37-5.0
firefox-70.0.1-3.2 gc-8.0.4-3.0 gnupg-2.2.19-1.0 gnustep-base-1.26.0-3.0
gnutls-3.6.11.1-1.1 gobject-introspection-runtime-1.62.0-3.0 gpgme-1.13.1-3.8
gptfdisk-1.0.4-1.7 gtk-update-icon-cache-1:3.24.13-1.1 gtk3-1:3.24.13-1.1
hexchat-2.14.2-6.0 icu-65.1-2.0 imagemagick-7.0.9.7-1.0 iproute2-5.4.0-1.0
jack-0.125.0-8.2 ldb-1:1.5.6-2.1 libass-0.14.0-1.9 libblockdev-2.23-3.0
libbluray-1.1.2-1.6 libbytesize-2.1-3.0 libcap-ng-0.7.10-1.0 libcups-2.3.0-4.2
libdbusmenu-qt5-0.9.3+16.04.20160218-4.3 libfm-qt-0.14.1-1.3 libgusb-0.3.1-1.0
libibus-1.5.21-3.0 libical-3.0.6-2.0 libimobiledevice-1.2.0+87+g92c5462-6.1
liblouis-3.12.0-1.0 libmm-glib-1.12.0-2.0 libnewt-0.52.21-3.2 libnftnl-1.1.5-1.0
libnm-1.20.8-1.1 libnma-1.8.24-1.2 libplacebo-1.21.0-1.3 libplist-2.1.0-2.1
libproxy-0.4.15-13.1 libpsl-0.21.0-2.2 libqtxdg-3.4.0-1.1 librsvg-2:2.46.4-1.1
libsoup-2.68.3-1.0 libteam-1.29-4.1 libusbmuxd-2.0.0-2.0 libutil-linux-2.34-8.0
libvoikko-4.3-1.0 libxml2-2.9.10-1.0 lightdm-1:1.30.0-2.3 link-grammar-5.7.0-2.1
linux-5.3.13.1-1.4 lximage-qt-0.14.1-2.1 lxqt-admin-0.14.1-1.3
lxqt-config-0.14.1-1.4 lxqt-notificationd-0.14.1-1.3 lxqt-powermanagement-0.14.1-1.3
lxqt-qtplugin-0.14.0-2.3 man-pages-5.04-2.0 mc-4.8.23-1.4 mesa-19.2.6-1.0
mpv-1:0.30.0-5.0 nano-4.6-1.0 network-manager-applet-1.8.24-1.2
networkmanager-1.20.8-1.1 nm-connection-editor-1.8.24-1.2 notepadqq-1.4.8-2.3
nspr-4.24-1.0 nss-3.48-1.0 obconf-qt-0.14.1-1.1 pavucontrol-qt-0.14.1-1.4
pcre2-10.34-2.0 polkit-qt5-0.113.0-1.2 poppler-0.82.0-1.0 poppler-glib-0.82.0-1.0
protobuf-3.10.1-1.1 python-3.8.0-1.0 python-appdirs-1.4.3-5.0
python-cairo-1.18.2-3.1 python-dbus-1.2.14-1.0 python-dbus-common-1.2.14-1.0
python-docopt-0.6.2-7.0 python-gobject-3.34.0-3.3 python-keyutils-0.6-4.1
python-ordered-set-3.1.1-1.1 python-packaging-19.2-5.0 python-pyparsing-2.4.5-1.1
python-setuptools-1:41.6.0-1.1 python-six-1.13.0-2.0 python-yaml-5.1.2-3.0
qt5-base-5.13.2-3.0 qt5-declarative-5.13.2-1.1 qt5-location-5.13.2-2.0
qt5-multimedia-5.13.2-1.0 qt5-sensors-5.13.2-1.1 qt5-svg-5.13.2-1.1
qt5-tools-5.13.2-1.0 qt5-webchannel-5.13.2-1.0 qt5-webengine-5.13.2-4.0
qt5-webkit-5.212.0alpha3-6.1 qt5-x11extras-5.13.2-1.1 qt5-xmlpatterns-5.13.2-1.1
qterminal-0.14.1-1.3 qtermwidget-0.14.1-1.5 raptor-2.0.15-12.0 readline-8.0.001-2.0
rubberband-1.8.2-3.1 shadow-4.7-3.0 smbclient-4.10.10-2.0 speedcrunch-0.12.0-2.4
systemd-244-1.0 systemd-libs-243.162-2.0 systemd-sysvcompat-243.162-2.0
talloc-2.3.0-1.0 tdb-1.3.18-4.1 tevent-1:0.9.39-4.1 udiskie-1.7.7-2.1
unarchiver-1.10.1-8.0 util-linux-2.34-8.0 volume_key-0.3.12-2.0
vulkan-icd-loader-1.1.129-1.0 x264-3:0.157.r2980.34c06d1-2.0 x265-3.2.1-1.0
xf86-video-intel-1:2.99.917+897+g0867eea6-1.0 xfsprogs-5.3.0-1.0
xorg-server-1.20.6-1.0 xorg-server-common-1.20.6-1.0 youtube-dl-2019.11.28-1.0
zstd-1.4.4-1.0
Gesamtgröße des Downloads: 439,60 MiB
Gesamtgröße der installierten Pakete: 1631,74 MiB
Größendifferenz der Aktualisierung: -3,80 MiB
:: Installation fortsetzen? [J/n] jLast edited by arch32yes (2019-12-11 09:38:08)
Offline
Pages: 1