You are not logged in.
Hi. There are some troubles with Qt6:
кві 09 19:43:36 alizee kernel: traps: telegram-deskto[1252] trap invalid opcode ip:b3f990c3 sp:bf8d0010 error:0 in libQt6Gui.so.6.2.3[b3ecb000+873000]
Stack trace of thread 1252:
#0 0x00000000b3f990c3 n/a (libQt6Gui.so.6 + 0xce0c3)
#1 0x00000000b7f67ecb call_init (ld-linux.so.2 + 0x5ecb)
#2 0x00000000b7f67fc4 _dl_init (ld-linux.so.2 + 0x5fc4)
#3 0x00000000b7f7f58a _dl_start_user (ld-linux.so.2 + 0x1d58a)
ELF object binary architecture: Intel 80386
кві 09 19:45:11 alizee kernel: traps: qbittorrent[1353] trap invalid opcode ip:b60c69b6 sp:bfd54e70 error:0 in libQt6Core.so.6.2.3[b5f22000+2fd000]
Stack trace of thread 1353:
#0 0x00000000b60c69b6 _Z26qCalculateGrowingBlockSizeiii (libQt6Core.so.6 + 0x21c9b6)
#1 0x00000000b60c6aa9 _ZN10QArrayData8allocateEPPS_iiiNS_16AllocationOptionE (libQt6Core.so.6 + 0x21caa9)
#2 0x00000000b61e9cef n/a (libQt6Core.so.6 + 0x33fcef)
#3 0x00000000b61139a4 _ZN18QThreadStorageDataC2EPFvPvE (libQt6Core.so.6 + 0x2699a4)
#4 0x00000000b656aca9 n/a (libQt6Network.so.6 + 0x31ca9)
#5 0x00000000b7f68ecb call_init (ld-linux.so.2 + 0x5ecb)
#6 0x00000000b7f68fc4 _dl_init (ld-linux.so.2 + 0x5fc4)
#7 0x00000000b7f8058a _dl_start_user (ld-linux.so.2 + 0x1d58a)
ELF object binary architecture: Intel 80386
% cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 7
model name : AMD Duron(tm) processor
stepping : 0
cpu MHz : 1074.608
cache size : 64 KB
physical id : 0
siblings : 1
core id : 0
cpu cores : 1
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow cpuid 3dnowprefetch vmmcall
bugs : fxsave_leak sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass
bogomips : 2149.21
clflush size : 32
cache_alignment : 32
address sizes : 34 bits physical, 32 bits virtual
power management: ts
Last edited by medved (2022-04-12 09:14:20)
Offline
Yep, not astominishing: Qt6 has a complicated build system and makes use a lot of SSE(2) etc.
I assume you are running the i686 subarchiteture and some SSE2 opcodes krept into the binaries.
I'll open a bug..
The problem lately is that SSE2 is the lowest ISA level on IA32, everything seems to start to
adapt into that direction. I personally don't expect new software to work on anything lower
anymore out of the box and the effort starts to get high to make it work on the i686 or/and i486
subarchitecture.
Offline